User manual UNIDEN XCAI680

[. . . ] . 41 41 42 42 42 43 43 44 45 45 46 47 47 48 48 49 50 51 52 52 54 54 55 55 56 57 2 Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Slots and openings in the cabinet and the back or bottom are provided for ventilation. [. . . ] During your conversation the LCD displays the call timer. DELETING 00:00:04 5. -- OR -- Place the Handset back on the Base. Using the Flash Key with Call Waiting You must subscribe to call waiting service from your local phone company to use this feature. 1. While talking you hear the call waiting signal. KATHLEEN ROL 817-858-3333 2. To switch back to your original call, press flash/function again. 34 Using Caller ID The Caller ID Display The LCD displays information about the current call and previous calls received on your XCAI680 cordless phone, including the total calls received, and the number of new calls received. The LCD display backlight is always active while the Handset is on the Base. When the Handset is removed from the Base, the LCD display backlight turns off immediately. LCD with Handset on Base TOTAL CALLS 10 NO NEW CALLS LCD with Handset off Base and caller id Pressed. NEW TOTAL 10 02 WITH NEW CALLS TOTAL CALLS 10 NO NEW CALLS NEW TOTAL 10 02 WITH NEW CALLS Note: The XCAI680 can store information on up to 30 different calls. Information on new calls received after 30 calls will be stored, and the oldest call in memory will be deleted. Viewing Calls in Memory 1. To view calls stored in memory, Press the w or v keys. To dial the number currently displayed, press the talk key. To add a 1 for long distance dialing, press 1 and then press the talk key. Note: If the number is longer than 12 digits, the display will scroll to the left until the last number is shown in the display. 4. To see all calls stored in memory, press the v key repeatedly until the LCD displays END. END 817-858-3333 35 5. To see the time and day a call was received: a. While the name and number are displayed press *. 05-10 10:05 AM 18 b. 6. To return to the name and number display press *. To see how many times a caller has phoned: a. While the name and number are displayed, press 9/#. KATHLEEN ROL 6 CALLS b. To return to the name and number display press 9/#. Calling the Displayed Number To dial the number currently displayed, press the talk key. To add a 1 for long distance dialing, press 1 and then press the talk key. Deleting Caller ID messages Only individual messages can be deleted on the XCAI680. Press caller id. 2. Press v or w to scroll to the call you want to delete. 3. Press and hold chan/delete for at least three seconds. A double beep tone sounds to confirm the message has been deleted. The next name and number is displayed. Repeat steps 2 and 3 to delete any other calls from the caller id memory. Press caller id when finished. 36 Programming Your Phone Storing a Caller ID memory number in Dial Memory There are 20 dial memory locations in the XCAI680 cordless phone. You can store any number in your Caller ID memory in Dial Memory so it can be used later with memory dialing. See Calling a Number Stored in Memory on page 39 for details on how to use the memory dial feature. Press v or w until the call you want to store is displayed. 4. Press mem. LOCATION?You hear a confirmation beep and the LCD displays: STORING 6 CALLS 6. Press caller id to return to Standby mode. Entering a Number in Dial Memory There are 20 dial memory locations in the XCAI680 cordless phone. You can manually enter any number into dial memory so that it can be dialed later. [. . . ] If it cannot, you may have to change to another phone. 56 Specifications General ­ The XCAI680 complies with FCC Rules, Parts 15 and 68. Frequency Control Modulation Operating Temperature Base Unit Receive Frequency Transmit Frequency Power Requirements Size Weight Handset Receive Frequency Transmit Frequency Power Requirements Size Weight Battery 43. 72 to 46. 97 MHz (25 Channels) 48. 76 to 49. 99 MHz (25 Channels) Rechargeable Ni-Cd Battery Pack 7 3/4 in. (including battery) BT-185 Capacity Talk Mode Standby Mode Answering System Memory Type Memory Capacity Message Length Digital Tapeless Recording approx. outgoing message (max. ) 270 mAh, 3. 6V 7 hours 14 days 48. 76 to 49. 99 MHz (25 Channels) 43. 72 to 46. 97 MHz (25 Channels) 120V AC 60 Hz 8 3 in. [. . . ]