User manual UNIDEN MC1010

[. . . ] The Uniden MC 1010 is of all solid state design with conservatively rated rugged components and materials compatible with the marine environment. The transceiver utilizes a number of gaskets, sealing rings, waterproof membranes, and other sealants to effect a splashproof housing for protection of the electronics. The unit may be mounted in any number of convenient locations on your vessel by utilizing the universal mounting bracket. You are encouraged to read the rest of this Operating Guide thoroughly to acquaint yourself with the characteristics and operation of your transceiver so that you can contribute to the longevity of your investment. [. . . ] 2. VOLUME (On/Off/Volume) - Turns the MC 1010 On or Off and varies the audio output. SQUELCH - Eliminates background noise when no signal is being received. Note: 3. Refer to the "Multi-Function Keys" section for detailed descriptions. H/L (Hi/Low) MEM 16/9 WX (Weather) CHAN - This control is used to manually select the desired Communication Channel (01 - 28 and 60 - 88), or Weather Channel (0 - 9). LCD Panel - Indicators for TX, SCAN, TRI, U I C, HI, LO, MEM, WX, and Channel Number. 9. 4 C:. . . MC 1010. vp Thu Jan 28 14:42:51 1999 Color profile: Disabled Composite Default screen Rear Panel Connectors 12 11 10 10. Remote Speaker Connector - An external 4 ohm, 4 Watt speaker may be connected to this jack. Antenna Connector - Connect the antenna here using a type PL259 connector. Supplied Power Cord - Connect supplied power cord to the keyed connector. 5 C:. . . MC 1010. vp Thu Jan 28 14:42:52 1999 Color profile: Disabled Composite Default screen 13. (Example: 0, 1, 2, 3, etc. ) Communication Channels are displayed as two digits (Example: 01, 02, 03, etc. ). Note: LCD Status Indicators appear when status is selected by pressing the corresponding button. 14. I (International) - Indicates International Channels have been selected. MEM (Memory) - Indicates if the displayed channel is in memory for scanning. 6 C:. . . MC 1010. vp Thu Jan 28 14:42:52 1999 Color profile: Disabled Composite Default screen Multi-Function Keys 3. STEP - This key is used to step through the channels which are stored in memory. · Press STEP to step through the channels which are stored in memory. · Press and hold STEP to begin scanning the channels in memory. Note: Triple Watch is automatically activated when scanning begins. 4. H/L - This key allows you to switch between high transmit power (25 watts) or low transmit power (1 Watt). · Press16/9 to access instant Channel 16/Channel 9 communications. --or-- · Press WX. Weather Scan To scan only Weather Channels 0 - 9, press WX, and then press and hold STEP. To exit from Weather Scanning: · Press 16/9 to change to Channel 16/Channel 9 communications --or-- · Press WX to change to standard channel communications. US/International/Canadian Channels To select operation (communication and scanning) on US Channels, press and hold WX to select the desired mode of operation. U (USA), I (International), or C (Canadian) will appear on the LCD Panel. Select the appropriate mode for operation. MEM (Entering channels into Memory) You can enter channels into memory for instant scanning at any time. When a channel is selected for Memory Scan, the indicator will appear on the LCD display. To enter a channel number into memory, select the channel number you want stored by pressing the CHAN Selector button up or down, and then press MEM. Note: In order for all functions of theMC 1010 to work properly, at least two channel numbers must be entered into the Memory Scan before operating the radio. Memory Scan To scan channels stored in Memory Scan, press and hold STEP. In the Memory Scan Mode, theMC 1010 scans only those channel numbers previously entered into Memory Scan. If no channel has been entered into Memory Scan, the error tone sounds and the LCD Panel does not change. Note: While in SCAN, pressing the 16/9 button three times or pressing and holding STEP will return the radio to the last channel it was on while in Scan mode. 9 C:. . . MC 1010. vp Thu Jan 28 14:42:53 1999 Color profile: Disabled Composite Default screen Transmitting When the power is turned on, the transmitter is set for 25 Watts (except for USA Channels 13 and 67). The HI indicator will appear on the LCD Panel, indicating 25 Watt transmit power. [. . . ] THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. [. . . ]