User manual UNIDEN GPS352

[. . . ] Some local, state, and federal regulations may prohibit the use of this detection device. Please check with authorities regarding the use of this device before operating it. Since the GPS352 determines its positioning from GPS (Global Positioning System), a navigational positioning system whose operation is controlled by the Department of Defense (USA), its performance may be limited by the operational conditions controlled. Operation Notice Safety Warning Systems You have purchased the newest technology designed for Radar, Laser and Safety Warning System detection and alert. You should be aware that Safety Warning transmitters (the device that alerts your detector for safety warning alerts) will be available for use throughout the United States. [. . . ] There are different alert tones which distinguish each type of signal received. The metal portion of the bracket locks into the plastic portion at three different positions. These positions can be used for vehicles with different vertical windshield angles. The back position can be used for vehicles with windshields that are slanted back. For optimum laser detection, bend the angled portion of the windshield mounting bracket so that the GPS352 is parallel to the road surface. Be sure the GPS352 is mounted so it is free of obstructions from seat backs, rear view mirror, sun visors, or the ceiling of the automobile. There must be a clear 360º line of sight to the outside of the vehicle. Place the bracket and the GPS352 in the proper location on the windshield of your vehicle, and press the suction cups firmly against the windshield. 2. To mount the GPS352: 1. 2. 10 Connecting the Power Using the Cigarette Lighter Adapter A coiled power cord provided with the unit has a cigarette lighter socket plug at one end and a small connector at the other. 1. 2. Insert the small connector into the 12V DC power input on the side of the unit. Insert the other end into the cigarette lighter socket of your vehicle. After "Selected" indication, the display returns to the Normal mode. Note: To deselect the destination, choose "OFF" then press the SELECT/TRAP button. Choosing "OFF" will eliminate the direction arrow showing the way to your destination. 2. Mark Loc (Mark Location) To enter into this mode, select "Mark Loc" using the L or M button, and press the SELECT/TRAP button. At this mode, you can register the latitude and longitude data for 7 specific points as shown in fig. Select the point you want to register using the L or M button, and press the SELECT/TRAP button. After "Marked" indication, the display returns to the Normal mode. "Menu Mode" [SELECT/TRAP]SW [EXIT/ALERT]SW GREEN [SELECT/TRAP]SW GREEN [ ]SW GREEN [ ]SW GREEN [ ]SW GREEN [ ]SW [ ]SW GREEN [ ]SW GREEN [ ]SW GREEN [ ]SW [ ]SW [ ]SW [ ]SW [ ]SW [ ]SW [ ]SW [ ]SW [ ]SW Note: If the Status Indicator is red, you will not be able to program your location. Move to a different location in order to receive better satellite reception. When you approach the location, the detector sounds alert tones in 3 levels as follows. Distance (Radius/Mile) 1. 0 0. 5 0. 1 Alert Tone Time 3 sec 3 sec 3 sec Alert Display Time 3 sec 3 sec 3 sec Level 1 Level 2 Level 3 17 3. In this mode, the detector displays the maximum or average speed data stored in the GPS module. "Menu Mode" [SELECT/TRAP]SW [EXIT/ALERT]SW GREEN [SELECT/TRAP]SW GREEN [ ]SW GREEN [ ]SW [ ]SW Use the L or M keys [ ]SW [ ]SW [ ]SW to toggle between the GREEN maximum and average display. To delete the [SELECT/TRAP]SW GREEN data, select "Delete?" and press the SELECT/ 2sec later TRAP button. [. . . ] Also, the alert tones emitted when approaching a Trap Point or Mark Loc. Note: The default for mute mode is off. Audio/Dimmer Operation Press the CITY and the MUTE buttons simultaneously to select one of the following modes. Dimmer Off: Display lights normally Dimmer On Middle: Display is dimmed Dimmer On Low: Display is at its darkest level Note: The default mode for dimmer is off. 24 Care and Maintenance The GPS352 is designed to give you years of trouble-free service. There are no user-serviceable parts inside, and, except for the fuse, no maintenance is required. [. . . ]