User manual UNIDEN GMR1058-2CK REFERENCE GUIDE

[. . . ] To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden accessories specifically designated for this product. Adjusting the Sound (Key Beeps) Your radio emits a beep each time one of the buttons or keys (except for the PTT and Power boost button, and call key) are pressed. To turn this sound OFF, press and hold call key while turning ON the radio. Navigating through the Menu To access the advanced features of the GMR10582CK(4CK), your radio has a Menu function. 1) Enter the Menu. 2) Press the L or M key to increase or decrease the code number displayed. [. . . ] Transmission is initiated by speaking into the remote microphone instead of pushing the PTT button. Level oF (OFF) disables VOX, while levels (1-3) set the sensitivity of the VOX circuit. Use level 1 for increased sensitivity to voice in normally quiet environments, and use a higher level to reduce undesired activation in very noisy environments. Transmitting a Call Tone Your GMR1058-2CK(4CK) radio is equipped with 5 selectable call tones that will be transmitted when the call key is pressed. 1) Press and hold the sel/ key to turn the unit OFF. Channel Scan Feature Your GMR1058-2CK(4CK) radio has a channel Scan feature that allows you to easily Scan all 22 channels. When an active channel is detected, the unit will pause on that channel until the channel is clear. Pressing the PTT or Power boost button while the Scan is paused on a channel will allow you to transmit on that channel. The channel number on the display will change as the radio rapidly cycles through the channels. To turn OFF channel scanning: Press the sel/ key, call key, scan key, PTT button or Power boost button. 27 INSTALL THE BATTERIES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Antenna PTT (Push-To-Talk) Button Power boost Button Monitor Key Call Key Scan Key Speaker Channel Key Headset Jack Up Key On/off/select Key Down Key Microphone Battery Level Meter 15 16 17 18 19 20 21 22 23 24 25 26 27 Receive Indicator Power Boost Indicator Call Indicator Scan Indicator Channel Indicator CTCSS Indicator Transmit Indicator Volume Setting Indicator VOX Indicator Keypad Lock Indicator GMRS/FRS Indicator Charging Contacts Charging LED Your GMR1058-2CK(4CK) radio uses the NiMH battery pack or 4 AAA alkaline batteries (not included). If alkaline batteries are used, we recommend using high quality alkaline batteries. 2) Remove the battery compartment door by pressing up the tab at the bottom of the compartment door allowing the door to be removed. 3) Install the NiMH battery pack into the battery USING THE RADIO In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit. Turning the Radio On and Adjusting the Volume 1) Press and hold the sel/ key to turn the unit ON, and increase the speaker volume by pressing the L key. To decrease the volume, press the M key. Automatic Power Save Feature Your GMR1058-2CK(4CK) radio has a unique circuit designed to dramatically extend the life of the batteries. If there is no transmission nor an incoming call within 3 seconds, your radio switches to the Power Save mode. LCD Backlight The LCD backlight will automatically turn ON when any key (except for the PTT and Power boost button) is pressed. Monitor Mode Feature Your GMR1058-2CK(4CK) radio allows you to listen for weak signals on the current channel at the press of a key. To turn ON the monitor mode: icon will · Press mon for brief listening, the blink. The receiver circuit will stay open, and letting in both the noise & weak signals. To turn OFF monitor mode: · Press mon to return to "Normal" mode, and the icon stops blinking. Roger Beep Roger Beep is a BEEP that is sent to notify the end of transmission (PTT transmission, power boost transmission and VOX. ) Roger Beep can be heard through the speaker when Key Beep is on. If key beep is turned off, Roger Beep will not be heard from the speaker. [. . . ] THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OVERPAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. [. . . ]