User manual UNIDEN EZI996

[. . . ] 27 28 28 29 30 32 33 34 35 36 37 39 40 41 48 49 Caller ID Features Caller ID and CIDCW (Caller ID on Call Waiting) When the Telephone Rings . . Additional Information Changing the Digital Security Code Note on Power Sources . 21 3 Welcome Congratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. [. . . ] If this happens, a new security code is set automatically the next time the battery pack is charged. The digital security code is an identification code used to connect the handset and the base unit. The first time you charge your handset, the security code is automatically set. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 2) While holding the find handset key, place the handset in the base unit, and leave the handset on the base for more than 3 seconds. A new random security code is set. ADDITIONAL INFORMATION www. uniden. com A D D I T I O N A L I N F O R M AT I O N 33 Note on Power Sources Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery appears on the LCD and none of the keys will operate. Complete your conversation as quickly as possible and return the handset to the base unit for charging. Information stored in the phone's memory will be retained for 30 minutes after the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, Emergency Dial programming, and the CID list. Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call. Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. Please contact your place of purchase or the Uniden Parts Department for a replacement battery. Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. Do not remove or damage the battery casing. www. uniden. com · · · · 34 A D D I T I O N A L I N F O R M AT I O N Installing a Replacement Battery Follow the steps below if you need to replace a battery. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Remove the existing battery and unplug the connector from the jack. 3) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way. ) Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection. 4) Make sure you have a good connection by slightly pulling on the battery wires. 5) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. Use only the Uniden rechargeable battery pack (BT-905) supplied with your cordless telephone. ADDITIONAL INFORMATION Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday through Friday from 8:00 a. m. or online at www. uniden. com A D D I T I O N A L I N F O R M AT I O N www. uniden. com 35 Maintenance To maintain a good charge, it is important to clean the charging contacts on both the handset and base once a month. Then, make sure to go back over the charging contacts with a dry cloth. Contacts Contacts Caution Do not use paint thinner, benzene, alcohol, or other chemical products. [. . . ] NOTE: Place the power cord so that it does not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards. 46 A D D I T I O N A L I N F O R M AT I O N return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. [. . . ]