User manual UNIDEN EXS9966

[. . . ] THE EXS 9966 SPREAD SPE CTRUM OWNER'S MANUAL Digital Spread Spectrum provides the longest range, the clearest sound and the best privacy. CONTROLS AND FUNCTIONS CONTENTS Controls and Functions . . 3 Introductionxx Fold out the front cover of this owner's manual to use the handy CONTROLS AND FUNCTIONS page for reference. Installing and xx Adjustingxx OF YOUR OWNERS MANUAL Using Your New Phone . . 15 Using Yourxx New Phonexx CONTENTS Usingxx Caller IDxx Troubleshootingxx Using Caller ID . . 43 Specificationsxx WELCOME Congratulations on your purchase of the Uniden EXS 9966 cordless telephone. [. . . ] If the third person's number is busy or doesn't answer, press line 2 to hang up. To remove either caller from your conversation, ask one of the parties to hang up. When you return the handset to the base, all calls are disconnected. If you want to join a conversation on base or handset currently in use, press line 1 or line 2 twice. 22 4-WAY CONFERENCING A fourth person, at either the handset or the base, may be added to a conference call. For example, to add a fourth party at the handset to an ongoing conference call at the base: 1. Press conference at the base to bring the party at the handset in on the call. The following screen appears on the handset: (Conference) Line 1 Line 2 5. To remove either call from your conversation, ask one of the parties to hang up. Press the corresponding line button to end the call. 23 USING YOUR EXS 9966 INTERCOM From the Base to the Handset 1. (If no answer, press again to disconnect. ) When a call is on hold at the handset, and the base is paged, the base will ring even when the RING VOL switch is set to OFF. on the handset. To hang up at the base: Press To hang up at the handset: Press From the Handset to the Base . The person at the handset can join the conversation by pressing the button for the line In Use twice. 1. To hang up at the handset: Press To hang up at the base: Press . . 24 TRANSFERRING A CALL From Handset to Base 1. To transfer a call on line 1 from the handset to the base, press hold. The handset displays <Hold> and the line 1 LED on the base turns red. If no one is available to take the call at the base, return to the caller by pressing line 1 or on the handset to take a message or complete the call. To transfer a call on line 1 from the base to the handset, press hold. On the base, press The following screen appears: (Hold) Line 1 . Paging Base (Hold) Line 1 The status LED flashes on the base. . Paging The status LED flashes on the base. 25 3. On the handset, press line 1 to talk. If no one is available to take the call at the handset, return to the caller by pressing line 1 or on the base to take a message or complete the call. TRAVELING OUT-OF-RANGE As you begin to move too far from the base, you first hear a clicking sound. If you travel out-ofrange, your call terminates. 26 STORING A PHONE NUMBER IN MEMORY Your EXS 9966 stores up to 30 name/numbers in the handset plus 10 numbers in the base. On the Handset Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. Enter a name by using the and keys to scroll through the character menu(up to 13 characters). The following screen appears: The cursor flashes indicating the display is ready for a number to be entered. Store Number 27 7. Enter the phone number with the number keypad (direct entry up to 20 digits). [. . . ] The number automatically dials. For long distance calling, insert "1" by pressing 1 on the keypad before pressing line 1. 38 Storing a Caller ID number in a memory location 1. Press call id. The Caller ID summary screen shows the number of new calls and total number of calls. The following screen appears: New Total >Line 1 03 03 Line 2 01 01 Select Location 1>Smith John 2 UNIDEN 5. Use the and keys or enter a two-digit number (01-30) to select a blank memory location where you would like to store the number. [. . . ]