User manual UNIDEN EXAI8580

[. . . ] UNIDEN CORDLESS TELEPHONES EXAI8580 Series At Uniden, we'll take care of you! Thank you for purchasing a Uniden product. If you have any questions or problems, please do not return this product to the place of purchase. uniden. com or call our Customer Hotline at 1-800-297-1023 during regular business hours. * To order headsets, additional handsets, replacement batteries or other accessories, visit our website at www. uniden. com or call 1-800-554-3988 during regular business hours. * Uniden provides a customer service hotline for accessibility questions. If you have disability and need customer service assistance or if you have any questions about how Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314 (voice or TTY). [. . . ] The default security code is 80. Security code Press The system announces "Security code" use to: Press to save the setting. Set the number of rings the system will wait before it answers. Select 2, 4 , or 6 rings; select toll saver ( ) to have the system answer in 2 rings if you have any new message or 4 rings if you don't. Ring time Press The system announces "Ring time" use to: Press to save the setting. Set how much time callers have to leave messages. Select 1 or 4 minutes; select announce only (A ) to have the system answer but not let callers leave messages. Record time Press The system announces "Record time" use to: Press to save the setting. Have the system sound a tone when you have new messages. The tone sounds every 15 seconds until you listen to all new messages. Message alert Press The system announces "Message alert" use to: Press to save the setting. Change the language of the voice prompts. This doesn't affect the handset display. Press Language The system announces "Language" use to: Press to save the setting. Press The system beeps and returns to standby. 7-2. Setting Your Outgoing Message (Greeting) The answering system comes with two prerecorded outgoing messages, or greetings. The default greeting says: "Hello, no one is available to take your call. Please leave a message after the tone. " If you change the answering system to announce only (so it won't record any messages), the greeting changes to: "Hello. Please call again. " Recording your own greeting When you record your own greeting, the answering system does not delete the two prerecorded greetings: it saves your greeting along with them. The base beeps and announces "Record greeting. " 2) Start recording your message. Your greeting must be at least two seconds but no more than thirty seconds. The message counter display counts down from thirty so you know how many seconds you have left. The base sounds a confirmation tone, plays your greeting back for you. Selecting a greeting You can switch between the prerecorded greeting and your personal greeting any time: 1) With the phone in standby, press [greeting] to hear the currently-selected greeting. 2) While the greeting is playing, press [greeting] again to switch to the other greeting. After the greeting finishes playing, the base sounds a confirmation tone. Deleting your personal greeting Press [greeting]. The base deletes the personal greeting and announces "Greeting has been deleted. " Note: You cannot delete the prerecorded greetings. Turning the Answering System On and Off From the base Turning On Turning Off From the handset With the phone in standby, press [ ]. With the phone in standby, press [ / ] The message counter shows the number to access the answering system. With the phone in standby, press [ / ] to access the answering system. Press [9]. Note: If the answering system announces "No remaining time" when you turn it on, the memory is full (the message counter also shows . The answering system can't record any new messages until you delete some of the saved ones. 7-4. Listening to Your Messages · The message counter shows the number of messages stored in memory. [. . . ] The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. Radio equipment The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone". 11-7. [. . . ]