User manual UNIDEN DXAI3288-2

[. . . ] Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. ·Base unit (1) ·Handset (2) ·Charging cradle (1) ·AC adapter (2) ·Rechargeable battery (2) ·Telephone cord (1) ·Wall mount adapter (1) ·Beltclip (2) ·This Owner's Manual ·Other Printed Material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a. m. We can also be reached on the web at www. uniden. com D Plug the AC adapter cord into the base unit and charging cradle and then into a 120V AC outlet. Step 4 Before Using, Register Second Handset to Base After fully charging the handsets, remove the handset from the charging cradle and place it on the base. [. . . ] The system announces "Time", the current time and the guidance for setting the time. delete · Normally the idle time for the menu mode is 10 seconds before the system returns to standby. However for setting the time, the idle time is extended to two minutes. · Press and hold the select/volume or key to quickly scroll through the numbers on the display. Digital Answerer charge/in use answer on/off 2) Press the select/volume or key until the correct day is announced. 4) Press the select/volume or key until you hear the correct hour setting. The numbers [ ] through [ ] are displayed on the base as each hour is announced. 6) Press the select/volume or key until you hear the correct minute setting. The numbers [ ] through [ ] are displayed on the base as each minute is announced. find hs memo rec greeting ringer clock/menu mic set select/volume [ 40 ] THE INTEGRATED ANSWERING DEVICE www. uniden. com 7) Press the set key to select the minute. 8) Press the select/volume or The message counter displays [ key until you hear the correct AM or PM setting. You hear a confirmation tone, then the announcement "Time" and the time and day are announced for your review. After a few seconds, the system announces "To set security code, press menu key again". Setting a Personal Security Code (PIN) To play your messages from a remote location, you need to enter a two-digit Personal Identification Number (PIN) code (01-99). To select a PIN, perform the following steps: 1) Press the clock/menu key twice in standby mode. "Security code" and the current PIN code is announced as it is displayed on the base. 2) Press the select/volume or key until the desired number appears. The PIN code is set to "80" when you purchase the cordless phone. THE INTEGRATED ANSWERING DEVICE 3) Press the set key to select the PIN code. You hear a confirmation tone, then the announcement "Security code" and the new PIN code is announced. After a few seconds, the system announces "To set ring time, press menu again". www. uniden. com THE INTEGRATED ANSWERING DEVICE [ 41 ] Setting the Ring Time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. Setting (Toll Saver), the answering system picks up after two rings if you have new messages, and after four rings if there are none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid billing charges. You hear "Ring time", the current ring time ([ ] 2, [ ] 4, [ ] 6, [ ] Toll saver) is displayed on the base. 2) Press the select/volume or key until the desired ring time appears. 3) Press the set key to select the new ring time. You hear a confirmation tone, then the announcement "Ring time" and the new ring time is announced. After a few seconds, the system announces "To set record time, press menu again". [ 42 ] THE INTEGRATED ANSWERING DEVICE www. uniden. com Selecting the Message Record Time You have three record time options. The options "1 minute" or "4 minutes" sets the duration for recording the incoming messages. [. . . ] (A continuous power outlet is an AC outlet which does not have a switch to interrupt its power. ) · Keep the base and handset away from sources of electrical noise such as motors or fluorescent lighting. Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Central, Monday through Friday [ 60 ] ADDITIONAL INFORMATION www. uniden. com I. C. Notice TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. [. . . ]