User manual UNIDEN CONTAQ I

[. . . ] Visit our internet site: http:\\www. uniden. com 2 Using this Owners Guide t Throughout this Operating Guide the action (such as: press a key) is first, followed by a display of the results. Example: Press N, you will see: t If you want to cancel or exit a mode, press O. t If (while setting any function) you do not press any key for about 8 seconds, the display returns to standby. t When you see only the f key in a description, you can usually use either the f key to scroll forward or the k key to scroll backward. [. . . ] 13 Using the Alarms You can set the pager to sound an audible or vibrate alarm at the same time every day, and/or at a specific time on a certain date. When a set alarm time arrives ­ even if the pager is turned off ­ the pager repeatedly sounds a unique alert tone (different than any message alert tone pattern) or vibrates for about 20 seconds. t The bell icon appears in the display when you turn on any one of the two alarms (daily and/or date). t The bell icon disappears from the display only when both alarms are turned off. 14 Setting a Time Alarm To set an alarm for a specific time every day: Example: Every day at 5:54 p. m. 15 Setting the Date Alarm To set an alarm for a specific date and time: Example: February 14, at 5:54 p. m. To set the day, hour, minutes, and alarm alert type (AUDIO ALARM or VIB ALARM), repeat steps 3 and 4. 16 Choose and Change Options t t t t Time Stamp Quick View Sample Alert Word Wrap T To "escape" from any Option menu, press O. appears above the selected option, that option is on. Time Stamp On or Off Time stamp adds the day, time and date that a message came in. 17 Quick View On or Off Quick View lets you set your pager to automatically display each message when you receive it. From the standby display, go to Quick View (as shown): 1 Press N. To store the selected setting and return to standby, press N. 18 Sample Alert On or Off When you turn Sample Alert on, you can hear or feel a sample of the alert when you are setting it. From the standby display, go to Sample Alert (as shown): 1 Press N. To store the selected setting and return to standby, press N. 19 Word Wrap On or Off If a word in the display is more than 12 characters, Word Wrap prevents breaking it up. To see complete (unbroken) words in the display, turn word wrap on. From the standby display, go to Word Wrap (as shown): 1 Press N. When the pager receives a message, it beeps (or vibrates) for 8 seconds. When you have read the message, you can scroll through the next message by pressing f. To return to the standby display, press O. 24 Receiving Messages With Quick View and Time Stamp On 1. When the pager receives a message, it beeps (or vibrates) for about 8 seconds. If the message is longer than 12 characters, the second part of the message appears after a second. The display shows you have a message in memory. Unreadable Message If a message is received that is partially or totally unreadable, the unreadable characters are replaced with a lower case "u". When viewing a message, press and hold f. The message remains as long as you hold f. Message Freeze 25 Tone Only A "tone only" message doesn't have any numeric characters. It could be an unreadable message, an error or a preset message that alerts you to check your voice mail. Unread Message Reminder If you are using the Auto Reset alert mode (see Choosing the Alert Type on page 13), and, you do not read a message within 3 minutes, the pager sounds an 8-second series of reminder alert tones. This unread message reminder repeats up to 10 times or until you read that message. If you are using the Non-stop alert mode, the unread message reminder alert sounds continuously until you read that message. T If you use Non-stop, the alert sounds until you read the message or your battery runs down. 26 Reading the Mail Drop Message T When you receive a Mail Drop message, e appears in the standby screen. [. . . ] STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. [. . . ]