User manual UNIDEN CEZ260

[. . . ] Hearing Aid Compatibility (HAC) This telephone system meets FCC/Industry Canada standards for Hearing Aid Compatibility. Connecting the Handset 1. Connect one end of the coiled handset cord to the jack on the handset. Plug the other end of the coiled handset cord to the jack on the base. Place the handset in the cradle. Display Language Licensing Licensed under US Patent 6, 427, 009. RISK OF ELECTRIC SHOCK DO NOT OPEN This adjustment allows you to display the Caller ID prompts in English, French, or Spanish. [. . . ] CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. IMPORTANT: You will have approximately 90 seconds to replace the batteries before the memories stored are lost. Please read the instructions before replacing the batteries and have the batteries ready to be inserted beforehand. IMPORTANT: If you are not going to use the telephone for more than 30 days, remove the batteries because they may leak and damage the unit. Insert 4 AA-size alkaline batteries as shown on the diagram in the battery compartment. Snap the battery compartment door back into place and replace the desk stand. NOTE: If the low battery icon appears in the display, you need to replace the batteries. It is important that you replace the batteries as soon as possible in order to maintain Caller ID operation. While using the handset, you can adjust the speaker volume by pressing the VOLUME button continuously or pressing the LEFT or RIGHT buttons after pressing the VOLUME button. REC (Handset Receiver) volume shows in the display. NOTE: A timer (10 seconds on-hook and 3 seconds off-hook) located in the upper right side of the display will start, letting you know how much time is left until the unit returns to the Summary Screen. If you are at on-hook and PICKUP OR ADJ displays, you can adjust the phone number format by pressing the DIAL button. If the phone is off-hook and ADJUST shows in the display, you can adjust the phone number format by pressing the DIAL button. For example, sometimes a 7-digit local number cannot be dialed because it requires a 10-digit or 11-digit format. Press the DIAL button repeatedly to scroll through the 7, 10, and 11-digit numbers. Press any key (0-9, or quick call buttons A, B, or C) for the memory location. If there is a number already stored in the memory location it will appear on the display. Press any key (0-9, or quick call buttons A, B, or C) for the memory location. If there is a number already stored in the memory location it will appear on the display. Enter name, if necessary, and then press the STORE button again to confirm and save. To select a memory, press any key (0-9, or quick call buttons; A, B, or C. ). NOTE: You may select a different memory location by pressing LEFT or RIGHT to scroll through the memories or pressing key (0 - 9, or quick call buttons; A, B, or C. ). Press the SPEAKER button, or pick up the handset to dial the displayed number. One-year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below. [. . . ] To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. REN Number is located on the cabinet bottom. © 2009 Uniden America Corporation, Fort Worth, Texas Printed in China Setting Up the Caller ID Menu You should not plug the telephone into the modular jack while setting up the Caller ID menu. NOTE: You have 20 seconds following an entry before the phone returns to the Summary Screen. If you have pulse (rotary) service and want to access customer calling services (such as telebanking and long distance services) that require tone dialing, you can use this feature to temporarily change from pulse to tone service. After dialing the telephone number and connecting to the customer calling service, 1. [. . . ]