User manual UNIDEN 410

[. . . ] TABLE OF CONTENTS INITIAL SETUP Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 6 Non-Square Configuration Private Line Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Other Telephones with the System Phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting a Fax or PC Modem to the Data Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] At anytime during the conversation, you can press or lift the handset to use the speaker or handset. 1. Insert the RJ11 plug into the headset port, located on the left side of the unit. Press HEADSET ANSWER to answer or hang up a call. NOTE: If your headset uses a 2. 5 mm jack, you will need to purchase a headset jack adapter. SPEAKERPHONE OPERATION The unit features a digital speakerphone, designed to adapt to the acoustic environment for clear conversations on both sides. At anytime during a conversation, you can press HEADSET ANSWER or lift the handset to switch from using the speakerphone. Likewise, when you are using the headset or the handset, simply press the speakerphone and return the handset to the cradle to begin using the speakerphone. Press again to hang up. CALL DURATION TIME The hour, minutes and seconds of each call received or made are automatically displayed in the LCD during your conversation. This feature is especially helpful for call accounting and controlling long distance usage. NOTE: The timer resets for every call, and once that call cannot be recalled. 00:08:26 you hang up from a call, the duration of 23 TELEPHONE OPERATION ANSWERING CALLS LINE SELECTION Lines can be automatically or manually selected. AUTOMATIC LINE SELECTION The priority of lines is in numerical order. For instance, LINE 1 has priority, followed by LINE 2, LINE 3 and LINE 4. If LINE 1 is in use, LINE 2 will be accessed if the handset is picked up. In addition, if two lines are ringing and you lift the handset, the line priority above still applies. 1. The unit will access the available line. TELEPHONE OPERATION You will hear a beep: If you press the line button of a call in use where privacy has not been released, or If you press a line button where a line is not connected, or If all lines are in use, and you pick up the handset, you will hear an error beep and "ALL LINES IN USE" will appear in the display. MANUAL LINE SELECTION 1. You will hear a beep: If you press the line button of a call in use where privacy has not been released, or If you press a line button where a line is not connected, or If all lines are in use, and you pick up the handset, you will hear an error beep and "ALL LINES IN USE" will appear in the display. ANSWERING CALLS If you subscribe to any type of caller ID service from your local telephone company, the name and phone number (if available) of the caller will appear in the display within the first two rings. When the phone rings and the LINE INDICATOR rapidly flashes: Using the Handset, 1. To hang up, return the handset to the cradle. Using the Speakerphone, 1. To hang up, press HEADSET ANSWER . ANSWERING A CALL ON ANOTHER LINE DURING A CONVERSATION When you are speaking with a caller on an outside line and another call is received on another line, you will see the LINE INDICATOR flash. If you have ALWAYS RING on, you will also hear ringing on that line (see page 15). Press HOLD PAUSE to place the caller you are speaking with on hold. The LINE button of the call The LINE TELEPHONE OPERATION you place on hold will flash green. 2. Press the LINE button of the ringing call and begin speaking with the caller. INDICATOR will turn from a flashing red to a solid green. To return to the first caller on hold and hang up with the second call, press the LINE button of 4. Begin speaking with the first caller who has been released from hold. ANSWERING A CALL WAITING CALLER ID CALL If you subscribe to a call waiting caller ID service from your local telephone company, the unit can receive a caller ID record while you are on the line with another party. 1. If a second call comes in while you are on the phone you will hear a beep. [. . . ] If there is a problem with this unit, the telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning. Repairs can only be made by the manufacturer or an authorized service agency. Contact seller or manufacturer for details of permissible user-performed routine repairs, and where and how to have other than routine repairs made. This equipment may not be used on coin service provided by the telephone company. [. . . ]