User manual UNIDEN 1660 OWNERS GUIDE

[. . . ] You have purchased one of the most sophisticated and versatile cordless telephone systems available. To enjoy the best performance from the UNIT's many features, please read this Owner's Guide carefully and save it for future reference. INTRODUCTION TO YOUR MULTI-HANDSET SYSTEM TELEPHONE The unit is different from conventional cordless telephones. The base unit, when connected to AC power and a telephone line, can support the operation of up to eight handsets. You can now place a fully featured cordless handset anywhere in you home or office that you have AC power to connect the handset chargers. [. . . ] The base LED will flash and the handsets will display "MsgWait". ID:12 Ring USING A HEADSET Each handset can be used with any standard 2. 5 mm. headset for handsfree operation. ANSWERING AN INTERCOM CALL 1 2 3 1 2 Plug the headset into the headset jack on the top of the phone (remove the rubber plug if it is covering the hole). To return to using the handset without a headset, simply unplug the headset. 1 2 The LCD will show which handset is calling. ICM By 12 ID:15 Ring PAGE ALL HANDSETS To page all the handset users or to locate the handset from the base unit: Pick-up the handset and press a keypad key. The LCD will display: ICM By 12 ID:15 Talk The calling party's LCD will display: 1 2 3 Press PAGE on the base unit. L1 Msg Wait ID:11 INSTALLING THE BELT CLIP Place one side of the belt clip into the groove on the side of the handset. Snap the other side of the belt clip into the groove on the other side of the handset. PAGE ICM To 15 ID:12 Talk Each handset will make a chirping sound for about 15 seconds. To turn off the page, press OFF on any handset. 1 2 3 To retrieve your messages, follow the voice mail retrieval procedure specified by your local telephone company. Soon after you review the new messages, a signal will alert the unit to turn off the voice message indicators. To manually turn off the indicators, press FCN and then press DEL ("1"). 3 When the conversation is over, press OFF to release the call. PAGE PAGE 16 CALLER ID OPERATION If the name or number is larger than 12 characters in length, the first 12 characters will display on the handset's screen. To view the remaining characters, 17 REVIEWING CALLER ID RECORDS The unit can store 50 of the most recent Caller ID records. The records are stored in the base unit and can be accessed by any handset. Caller ID records are numbered sequentially, in the order in which they are received. When the 50 record memory is full, the oldest record will be deleted automatically each time a new record is received. To view the Caller ID records stored in memory: CALLER ID SUBSCRIPTION Caller ID is a subscription service available from your telephone service provider. For the Caller ID feature to work on the unit, you must subscribe to the service. To receive Caller ID information for a Call Waiting call, you must subscribe to combined Call Waiting Caller ID service from your telephone service provider. Even if you subscribe to both Caller ID and Call Waiting services separately, it is possible that you are not subscribed to the combined service. 5 6 BLUMENFELD J 6189910 Press MUTE again to toggle back to the name and number display OR press v to continue scrolling to the next most recent record. Press OFF to exit, or wait 15 seconds and the LCD will revert back to the standby display. 1 2 Press MUTE (on the side of the handset). ENNIFER Press MUTE again to view the date and time of the call, as well as the Caller ID record number and the Repeat Indicator. REPEAT COUNTER The unit is programmed to automatically condense all calls from the same phone number within the same day as a single Caller ID record. This feature saves memory and prevents the Caller ID log from being filled with duplicate records from frequent callers. Each time that a repeat caller calls again within the same calendar date, the unit will condense the calls into one Caller ID record, listing only the time of the most recent call. When viewing a Caller ID record, press MUTE to toggle to the screen that contains the record number, the time and date of the call, and the Repeat Counter. The number displayed in the Repeat Counter indicates how many times the repeat caller called that day. [. . . ] 21 Deleting All Directory Records21 BASIC OPERATION Standby (Idle) Mode . . . . . . . . . . . . . 13 Handset Low Battery Indicator 14 Using a Headset . . . . . . . . . . . . . . . . . . . 15 INITIAL SETUP Selecting a Location for the Base Unit . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY PRECAUTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. [. . . ]