User manual UNIDEN 1380

[. . . ] User's Guide Model 1380 Speakerphone Telephone with Digital Answerer and Caller ID on Call Waiting Important Information NOTICE: This product meets the applicable Industry Canada technical specifications. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. [. . . ] Press FLASH/EXIT again to return to the original call. Receiving and Storing Calls The unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. When the Caller ID memory is full, a new call automatically replaces the oldest call in memory. NEW appears in the display for calls received that have not been reviewed. REPT appears in the display for calls received more than once which have not been reviewed. Reviewing Call Records Use either the SKIP or REPEAT button to review your Caller ID records. · Press REPEAT to scroll through the call records from the most recent to the oldest. · Press SKIP to scroll through the call records from the oldest to the newest. · When all of the messages have been viewed, the screen displays START/ END. · If there are only old calls, all the calls will be reviewed. 3 Deleting CID Records · To delete the record shown in the display, press the DELETE button once. · To delete all records while reviewing, press and hold the DELETE button for about three seconds. Press DELETE again to complete. Dialing Back When reviewing Caller ID records, you can dial back the numbers on the display by pressing the dial button. Note: If PICKUP PHONE shows in the display, no other changes to the number can be made. The information sent from the telephone company is known to be a valid number for dialing back (used only in very limited areas). Once you pickup the phone, the number is automatically dialed. If You Programmed Your Local Area Code 2. Use the SKIP or REPEAT buttons to display the number you want to dial. Note: A timer (10 seconds on-hook and 3 seconds off-hook) located in the upper right side of the display will start, letting you know how much time is left until the unit returns to the Summary Screen. 3. If you are at on-hook and PICKUP or ADJ displays, you can adjust the phone number format by pressing the DIAL button. If the phone is off-hook and ADJUST shows in the display, you can adjust the phone number format by pressing the DIAL button. For example, sometimes a 7-digit local number cannot be dialed because it requires a 10-digit or 11-digit format. Press the DIAL button repeatedly to scroll through the 7, 10, and 11-digit numbers. 425-555-5555) long distance code 1 + 3-digit area code + 7-digit telephone number (i. e. To dial the displayed number, and the phone is on-hook, pick up the handset or press the SPEAKER button before the timer reaches 0. [. . . ] · Base is installed in the basement or lower floor of the house. · Base is plugged into AC outlet with other electronic devices. · You're out of range of the base. 0 Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. [. . . ]