User manual UNIDEN 1260

[. . . ] Hearing Aid Compatibility (HAC) Model 1260 Slimline Memory phone User's guide This telephone system meets FCC standards for Hearing Aid Compatibility. Setting Up the Caller ID Menu IMPORTANT: Do not plug the telephone into the wall jack while setting up the Caller ID menu because an incoming call may invalidate the information not yet saved. 1. SET OR appears in the display. Telephone Basics Connecting the Telephone Line 1. Place the handset in the cradle. Reviewing CID Records As calls are received and stored, the display is updated to let you know how many calls have been received. Press either the (+) or (-) down button to view the newest call record. [. . . ] 555-5555)10-digits: 3-digit area code + 7-digit telephone number (i. e. 425-555-5555) 11-digits: long distance code 1 + 3-digit area code + 7-digit telephone number (i. e. To dial the displayed number, pick up the handset before the timer reaches 0. telephone If you don't have a modular jack, call your line jack local phone company to nd out how to get one installed. 1. Press the ash button or the hook switch to exit. NOTE: If you make a mistake, you can simply repeat the previous steps until your area code is set. Regional Area Codes for 10-Digit Dialing Like the Local Area Code, the telephone uses the programmed area codes to determine the number format to display when a valid Caller ID signal is received. Calls that match any of the programmed regional area codes are displayed as 10 digits. This is helpful in areas that have multiple or overlapping area codes and require 10-digit dialing. Press the (+) button until REGIONAL AC'S-1: _ _ _ _ _ _ _ shows in the display. The left-most digit, or minus sign (-), ashes, indicating the unit is ready to accept the area code entry. Press the (-) button, and select a number from 9-0 for the first digit of the are code. When the desired digit is ashing, press the (+) button to advance to the next digit. Press the menu button again to enter the next three-digit regional area code and repeat steps 4 and 5 until all the REGIONAL AC'S-1 (RAC#1) and REGIONAL AC'S-2 (RAC#1) are entered. Press the menu button to store the setting and return to the REGIONAL AREA CODE display. Press dial to exit. Important Installation Information · Never install telephone wiring during a lightning storm. · Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. · Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. · Use caution when installing or modifying telephone lines. Adjusting the Volume You may control the listening level with the VOLUME switch, which has three levels. It remains at the last level set until you change it. Chain Dialing This process allows you to dial a succession of stored numbers from separate memory locations. This is useful when you must dial several sequences of numbers, such as with frequent calls via a telephone company long distance provider. For example Local access number of long distance company Authorization code (ID) Long distance phone number 1. Memory location 6 7 8 · · Redialing a Number If you want to call the last number you dialed again (up to 32 digits), use the redial feature. The last number called is automatically redialed. · · Handset Layout *tone (button) store (button) mem (memory button) ash (button) redial (button) Ringer Volume Name of Store Purchase Date Using One Touch Redial If the last call you dialed was busy, you can redial it immediately by just pressing the redial button and without hanging up the handset. Industry Canada (I. C. ) Notice Terminal equipment NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. [. . . ] As a precaution, you may want to write down any stored information you do not want erased. Your Caller ID phone uses 3 AA-size alkaline batteries for receiving and storing Caller ID records and for the numbers you use for memory dialing. Open the battery compartment door with your nger or thumb. Battery compartiment Select Contrast This adjustment allows you to select the contrast of the display. Press the menu button to store the contrast setting and return to the SELECT CONTRAST display. Call Waiting Caller ID Provided you subscribe to Call Waiting Caller ID service form your phone company; if you receive an incoming call and you are using Uniden's multi handset system, a beep indicates the presence of a Call Waiting call on the line. The Call Waiting Caller ID information will be displayed and stored in the history of all handsets in the system. [. . . ]