User manual ULEAD BD DISCRECORDER 2.7

[. . . ] LabelFlash and the LabelFlash logo are trademarks and/or registered trademarks of the Yamaha Corporation. "AVCHD" and "AVCHD" logo are trademarks of Matsushita Electric Industrial Co. , Ltd. All other product names and any registered and unregistered trademarks mentioned are used for identification purpose only and remain the exclusive property of their respective owners. Patent 6, 121, 976; Taiwan Patents 079758 and 147957. Template files Files provided as samples on the program CD can be used for personal demonstrations, productions and presentations. [. . . ] A program is a video clip recorded by a set-top Blu-ray recorder, captured from a video source, or imported from a DVD video folder. You cannot capture copyrighted sources or videos protected by recognized protection schemes such as Copy Generation Management System for Analog (CGMS-A) and for Digital (CGMS-D), Content Scrambling System (CSS), Theatermark and Macrovision. To create a new video project: 1. Click New to burn your project onto a new disc or Append to insert and burn new programs onto your BD disc. When appending a disc, select your BD drive from the Select Drive list. Note: BD-R discs can be appended if your burner supports Pseudo OverWrite technology. 3. Click Next. Note: When appending, the light gray colored area on the BD Capacity bar indicates the disc space already used by the current disc content. 8 BD DiscRecorder USER GUIDE Introduction to the workspace 1 2 3 4 5 6 7 8 9 1. Program list Select a program (video clip) to display in the Program video clip list. Remove and Info Use these buttons to remove programs or view program properties. Settings and Options Click to open a menu where you can customize preferences, or view information about BD DiscRecorder. Project settings Click to view information about the project and customize its output settings. BD DiscRecorder USER GUIDE 9 7. Show BD capacity Displays the total file size and video length to be used in the disc. BD DiscRecorder 8. Navigation controls Use these buttons to preview your video clips. Capturing videos BD DiscRecorder lets you capture videos from DV and HDV camcorders. To capture video from a DV camcorder: 1. Select a capture mode and video format. Note: You can only choose a video format with Dolby Digital 5. 1 channel surround sound encoding if your DV camcorder uses 4-channel audio. 4. Use the navigation controls to locate the starting point of the video to capture. Repeat steps 2 to 7 as needed to capture more videos. 10 BD DiscRecorder USER GUIDE Capturing High-Definition video (HDV) Before capturing your HDV or HD video into BD DiscRecorder, make sure that your camcorder (or deck) is properly detected by your computer. Also check the following: On Sony HDV camcorder: If you have connected your Sony HDV camcorder before to your computer, check the Device Manager to see if your camcorder is detected as a DV device or AV/ C tape device. If the camcorder is detected as a DV device, you can capture DV footage. If your camcorder is detected as an AV/C tape device, you can capture HDV footage. DV mode HDV mode Note: The Sony HDV camcorder can be detected only under Windows XP Service Pack 2. To capture video from an HDV camcorder: 1. Connect your HDV camcorder to your computer's IEEE-1394 port using the IEEE-1394 cable. If you have a Sony HDV camcorder, make sure it is switched to HDV mode. In the Device Control dialog box, select HDV 1394 Device Control in Current Device drop-down list. After defining your capture options, click Advanced Settings and select Change Capture Plug-in. Choose Ulead HDV Capture Plug-in from the Current Capture Plug-in list, and then click OK. [. . . ] A BDAV disc must be formatted using UDF 2. 5 (Universal Disc Format) for rewritable discs. To format a disc, click and then click OK to start. BD DiscRecorder Notes: · · BD-R discs can be appended if burner supports UDF 2. 6 file system. Format Disc is also available on the Straight to Disc page. Straight Capture to Disc BD DiscRecorder provides a fast way to capture videos and then burn them directly onto a disc in the BDAV format. When this task is selected, BD DiscRecorder will initially check both your burner and disc to ensure that there are no problems with your output device and media. Note: If you want to capture and burn in the DV-AVI format, select Do not compress DVAVI to MPEG in Preferences. [. . . ]