User manual TVIX HD TUNER T-530

[. . . ] Magnetic materials such as speakers or magnets may erase or cause damage to the data stored in the hard disk. It may cause malfunction or fire. Starting TViX HDTV mode can take about 12~13 seconds. Checking Digital signal Reception · Press the INFO button on the remote control. · If signal strength meter indicates less than 14. 9db, adjust your antenna to increase the signal strength. [. . . ] TViX HDTV SETUP Setting The HDTV setting can be shown on the screen when the tuner is connected. Boot Mode : DTV Time Auto Sync : HDTV Input : Location : Time Zone : File Player off Air USA Central Time(US& Canada) HDTV Default Audio : Start Channel Scan English boot mode : Select HDTV to start in HDTV mode or File Player to start in File mode (main menu). If the HD tuner is not connected, TViX will start in file mode automatically. Time Zone : If you want to use exact EPG guide, you have to configure your time zone using Up/Down button. HDTV Default Audio : select default audio. Start Channel Scan : Press this menu if you want to scan the channel. 7 Using TVIX HD TUNER 1. Channel scanning Before you can use any of the special channel buttons, the available channels must be scanned and memorized. HDTV Tuner will scan and store all of the digital (DTV) channels that are available in your local area automatically. If you want to scan the channel manually, you can use Start Channel Scan option on the SETUP-HDTV menu. It takes about 2~3 minutes To stop the scanning, press STOP() button on the remote control. After scanning, you have to configure the time zone, If you want to use exact EPG guide, you have to set your time zone exactly. If you press the VIDEO button on the remote control to change to file mode while scanning channels, the following message appears. Press YES, and TViX is changed to file mode. If you press power button while scanning, the following message appears. Press YES, and TViX will shut down. 8 Checking Digital signal Reception Press the INFO button on the remote control. If signal strength meter indicates less than 14. 9db, adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. 2. Changing the channel Press CH +/or button to change the TV channels. You can also enter the channel number by using the numeric keypad on the remote and the channel will change after a few seconds. 3. · Select the desired channel to record while watching and then press the REC button to record. · Press the STOP() to stop recording, or, when the recording duration is reached, the TViX will stop recording. · The recorded file is stored to the hard disk of the TViX in a folder named DTV_REC The file is saved with a name of the form "YY-MM-DD day station named AM/PM HH:MM. tp" The hard disk must be used under the NTFS file system. If the FAT32 file system is used, an error message appears. · Each press of the REC button changes the recording duration in the sequence shown below. Free Space->30min->45min->60->75->90->105->120->150->180->210->240. When recording, you can see red-round OSD on the left-top of the screen. You can also add recording time by pressing the REC button during instant Record. 9 · When recording, if the available storage space lacks, the recording will automatically stop. [. . . ] If you set schedule on 4 o'clock, your TVIX will be turned on 3:55 as scheduled recording. Using Check Disk To delete files or folders, you must sometimes run the Check Disk. The TViX player will show the following message when you need to check the hard disk. Connect the TViX to the PC's USB port. You must select the hard disk without showing its contents in Windows Explorer, or Check Disk cannot run on it. [. . . ]