User manual TRICITY CDW101W

[. . . ] OPERATING & INSTALLATION INSTRUCTIONS Dishwasher CDW 101 Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the central filter Cleaning the large filter External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Customer Care Department Guarantee conditions Tricity Bendix Service Force Hints for test centres Technical specifications 3 4 4 5 5 7 8 8 9 10 11 12 13 14 14 14 14 15 15 15 15 16 17 17 18 19 21 21 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Adjusting the worktop Fitting under a counter Levelling 22 22 23 24 25 25 25 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 2 IND27en Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. You MUST read it carefully before installing or using the appliance. Installation q q q Do not sit or stand on the open door. [. . . ] The "Mains On" indicator light remains on until the On/Off push button is depressed. 2. Check that there is rinse aid and salt Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Switch off the dishwasher 3. Switch off the dishwasher by pressing the On/Off push button and open the door. Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. 4. Ensure that the spray arms can rotate freely. Measure out detergent Add the detergent into the dispenser according to the dosage instructions from the manufacturer of your brand. Close the detergent dispenser lid. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. 5. 6. 7. Close the dishwasher door Set the programme Turn the programme selector dial clockwise until the number of the programme you wish to select corresponds with the programme marker on the control panel. Important!Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. 8. Start the programme Depress the On/Off push button. The "Mains On" indicator light will come on and the machine will start. If you wish to interrupt the washing programme at any time press this button again. 13 SEQ17en Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water. Once cleaned, refit the filter by pushing it back to its original position until it engages. MA04 A MA19 Cleaning the large filter (Every month) If necessary clean the large filter (B) on both sides under running water, using a brush. Turn the column (C) anticlockwise by 90° and then slide out the filter. MA05 90° B C MA20 3. Once cleaned refit it following the above instructions in reverse order. Ensure the filter is in its original position, the handle of the drain filter should be pointing towards the front of the appliance. MA21 MA18 The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine. 14 MAN04UKen External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc. . . . ). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. [. . . ] Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter. 22 COL08en Water outlet hose connection min 4 cm min 30 cm max 100 cm COL09en The end of the drain hose can be connected in the following ways: 1. Hooked over the edge of the sink using the special curved plastic guide provided. [. . . ]