User manual TRICITY CDW087

[. . . ] OPERATING & INSTALLATION INSTRUCTIONS Dishwasher CDW 087 Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the central filters Cleaning the large filter External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Guarantee conditions Hints for test centres Technical specifications Tricity Bendix Service Force 3 4 4 5 5 7 8 8 9 10 11 12 13 14 14 14 14 15 15 15 15 16 17 18 19 19 24 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Adjusting the worktop Fitting under a counter Levelling 20 20 21 22 23 23 23 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 2 IND20en Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. You MUST read it carefully before installing or using the appliance. Installation q q q Do not sit or stand on the open door. [. . . ] Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. You will improve drying results by leaving the dishwasher door ajar for at least 15-30 minutes as soon as the programme finishes. For best results we recommend the use of Finish detergents, rinse aid and salt. POURING EASY PACK TION DOUBLE AC FOR A BRILLIANT SHINE N EW LIQUID GEL POWDER RINSE C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T DE15 11 CON06en Washing programmes Programme Degree of soil Starting position of the programmer Required pushbuttons Cycle description RINSE AND HOLD Any. Crockery and cutlery 1 On/Off 1 cold rinse, (to avoid food scraps from sticking together). POWER WASH 65°C 2 3 4 On/Off Cold prewash Main wash up to 65°C 2 cold rinses 1 hot rinse Hot air drying Main wash up to 65°C 2 cold rinses 1 hot rinse Hot air drying Main wash up to 65°C 1 cold rinse 1 hot rinse NORMAL WASH On/Off * ECO WASH 65°C On/Off * This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that you may re-use them promptly. 12 PRO25en Operating sequence 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 9. At the end of the washing programme At the end of the programme the dishwasher will automatically stop. The "Mains On" indicator light remains on until the On/Off pushbutton is depressed. 2. Check that there is rinse aid and salt Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. Switch off the dishwasher 3. Switch off the dishwasher by pressing the On/Off pushbutton and open the door. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. In general it is not advisable to open the door while the machine is working;if the door is opened however, a safety device ensures that the machine stops. 4. Ensure that the spray arms can rotate freely. 7. Close the dishwasher door Set the programme Turn the programme selector dial clockwise until the number of the programme you wish to select corresponds with the programme marker on the control panel. Important!Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. 8. Start the programme Depress the On/Off pushbutton. The "Mains On" indicator light will come on and the machine will start. If you wish to interrupt the washing programme at any time press this button again. 13 SEQ17en Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale. D C B Cleaning the central filters (After each wash) Inspect the central filters (B) and (C) and remove any scraps of food with a brush, under running water. Filters (B) and (C) are both removed by lifting up the outer one (B) (pulling the central funnel upwards); the smaller filter (C) can be removed by pressing the two tongues (D). Once cleaned, refit the filters by pressing them down until they click into place. MA13 MA08 Cleaning the large filter (Once a month) Clean the large filter (A) on both sides under running water, using a brush. To take it out, remove the spray arm by pressing the two tongues (E), turn the ring (F) anticlockwise and then slide the whole part out. Refit the filter following the above instructions in reverse order. E A F MA01 The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine. 14 MAN06UKen External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. [. . . ] If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine. CS10 Ø 18 Ø 21 + 2 m max 21 max 100 cm min 30 cm max 100 cm Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measures not be observed. [. . . ]