User manual TRICITY BENDIX AW 1000 W

[. . . ] OPERATING & INSTALLATION INSTRUCTIONS WASHING MACHINE AW 850 W AW 1000 W 35. 292. 778/0 Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. You MUST read them carefully before installing or using the appliance. Installation q q q q q q q q This appliance is heavy. It is dangerous to alter the specifications or attempt to modify this product in any way. [. . . ] This is particularly important if you are using Washing Programmes Programmes for cotton and linen Wash programme Degree of soil and type Programme dial of laundry position Description Possible options Max. load White cotton, for example heavy soiled sheets, Whites+Prewash garments, household linen, underwear, towels. White cotton, for example normally soiled garments, sheets, household linen, underwear, towels. Prewash at 40 °C Wash at 90°C rinse hold 3 rinses half load Long spin (**) 1 4. 5 kg Whites 2 3 (*) 4 5 6 Wash at 90°C 3 rinses Long spin (**) rinse hold half load 4. 5 kg Fast coloured cotton or linen fabric, shirts, Fast coloureds underwear, towels. (normally soiled) Wash at 60°C 3 rinses Long spin (**) Wash at 40°C 3 rinses Long spin (**) 4 rinses Long spin (**) rinse hold half load 4. 5 kg Non fast coloureds Rinses Non fast coloured cotton or linen fabrics, shirts, blouses, underwear. Separate spin for cotton and linen items rinse hold half load 4. 5 kg rinse hold 4. 5 kg Spin Long spin 4. 5 kg (*) This programme at 60°C with cold water filling and a wash load of 4. 5 kg is the reference programme for the Energy label according to EEC Directive 92/75. Water filling: 30°-30°-40° programmes: cold water filling 50°-60° programmes: hot and cold filling 90° programmes: hot water filling The programme times are intended as a guide only. The actual time will vary depending on incoming water temperature and pressure. (**) If the rinse hold button has not been depressed. 13 Washing Programmes Programmes for synthetics, delicates and wool Wash programme Degree of soil and type of laundry Synthetic or mixed fabrics, underwear, coloured garments, nonshrink shirts, blouses. load Prewash Wash at 50°C 3 rinses Short spin (*) Mixed fabrics 7 rinse hold 2 kg Synthetics Synthetic or mixed fabrics, underwear, coloured garments, nonshrink shirts, blouses. 8 9 10 11 12 13 14 Wash at 40°C 3 rinses Short spin (*) rinse hold 2 kg Quick & Cool Lightly soiled synthetic or delicate items Wash at 30°C 3 rinses Short spin (*) Draining of water and short spin (*) Wash at 40°C 3 rinses Short spin (*) Wash at 40°C 3 rinses Short spin (*) rinse hold 2 kg Short spin Separate spin for synthetics and delicates Specially tested programme for wool garments Delicate fabrics, for example curtains. 2 kg Wool wash rinse hold 1 kg Delicates rinse hold 2 kg Delicate Rinses Separate rinse cycle for hand washed garments For emptying out the last rinse water in programmes with Rinse Hold option 3 rinses (with fabric rinse softener if required) hold Short spin (*) 2 kg Drain Draining of water - (*) If the rinse hold button has not been depressed. 14 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. C0072 C0073 Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. After each wash Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal. Maintenance Wash With the use of low temperature washes it is possible to get a build up of residues inside the drum. q Use a normal measure of detergent, must be a powder (such as Ariel Futur). P0038 Cleaning the pump The pump should be inspected regularly and particularly if · the machine does not empty and/or spin · the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. · Open the pump door. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. To aid cleaning, the top part of the additive compartment should be removed. P1114 · Place a container close to the pump to collect any spillage. · Pull out the emergency emptying hose, place it in the container and remove its cap. 15 · When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover. Remove and clean the filters using a hard bristle brush. [. . . ] Use the plastic "U-piece" supplied. Important q Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. P0022 23 Min. 60 cm. (23. 6") The appliance drain hose should hook (use the plastic "U-piece" supplied) into a standpipe with an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. Levelling Level the washing machine by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case. Accurate levelling prevents vibration, noise and displacement of the machine during operation. [. . . ]