User manual TRIANGLE LN01A

[. . . ] Com/ 2- Warranty card You can also register your product and validate your warranty by filling the warranty card and sending it to : TRIANGLE DISTRIBUTION FRANCE 44 rue Barreyre - CS 40099 33300 Bordeaux Cedex FRANCE 4 Note sur la garantie Vos enceintes TRIANGLE bénéficient d’une garantie de 2 ans. ) ÎÎ Toute panne résultant de l’intervention d’une personne non habilitée par TRIANGLE ÎÎ Impacts sur l’ébénisterie (rayures, écrasement, chocs divers) Note on the warranty Your TRIANGLE loudspeakers are warranted for 2 years. This warranty takes effect from the date of purchase and covers any manufacturing defect or damage your loudspeakers could suffer as a result of these same defects. This warranty is granted solely to the first owner of the product, and is not transmittable in the case of resale. [. . . ] Reducing bass 1 3 4 6 8 10 12 SOURCE E 2 5 7 9 TREBLE TREBLE + - 11 13 BASS + BASS - When using the remote, always direct it towards the receiver on the front of the main speaker. 25 EN CONNECTING SOURCES The ELARA active speakers can be paired with a variety of sources. Here are the various options : Connection via Bluetooth This enables you to stream music wirelessly thanks to latest generation 4. AptX is a coding system which enables you to stream music to your Elara speakers via Bluetooth, delivering sound approaching CD-quality. The range is of about 10 meters, depending on the surroundings and obstacles within the path. Elara active speakers lets you play music from any Bluetooth-enabled sources: smartphone, tablet, computer, etc. To do so: ÎÎ Slide the power switch on the back to the ON position to activate your Elara speakers. ÎÎ Select the “Bluetooth” input using the “INPUT” button on the back of the speaker or on the remote. ÎÎ Press the “Bluetooth” button on your remote. The blue LED blinks, indicating that the system is seeking to connect to a Bluetooth-enabled device (smartphone, tablet…). ÎÎ When you search on your Bluetooth device (refer to the user guide if needed), the speakers should appear under the name “LN01A” or “LN05A”, you can then connect to this. Your speakers are now linked to your device and will reproduce the sound from the device. The connection will be made automatically next time you switch on your speakers if Bluetooth is selected and enabled on your device. ÎÎ If you wish to connect another device while the previous one is still connected, disable the Bluetooth connection from your formerly paired device or disconnect it directly from the Bluetooth menu. ÎÎ Elara active’s Bluetooth process allows you to change track, play and pause directly from your remote, without using the connected device. ÎÎ Your Bluetooth device now controls your speakers and you can change the volume directly from this device. 26 EN Connection via an RCA cable or line phono The RCA input enables you to connect your Elara active speakers to your TV, CD player, turntable or any other device. To do so: ÎÎ Plug the red and white connectors into “RCA INPUT” on the back of the speaker, minding the colours, and do the same on the source. ÎÎ Select the “RCA” input using the remote or the “INPUT” button (volume button) on the back of the active speaker. (Source selecting order is indicated above the “INPUT” button. ) The green LED indicates that the source is actually connected to the “RCA” input. Connecting a turntable: To plug a vinyl player, push the “PHONO IN” switch to the left for the signal to pass through the phono chain. [. . . ] Adjusting the amount of bass: 6 positions available in 2dB steps over a range between 30 and 400Hz. The low-frequency output will increase or decrease each time the remote control is pressed. Adjusting the amount of treble: 6 positions available in 2dB steps over a range between 2 and 30KHz. The high-frequency output will increase or decrease each time the remote control is pressed. [. . . ]