User manual TRENDNET TW100-BRF214

[. . . ] TRENDnet User's Guide Cover Page TRENDnet User's Guide Table of Contents Allow FTP connections using an FTP Non-standard port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Allow NetMeeting H. 323 connections through your router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Allow/deny ping requests to your router from the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Identify your network on the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: If you would like to discard the changes, click Cancel before you click Apply. If you have multiple static WAN/Internet IP addresses assigned by your ISP (Internet Service Provider), you can map these WAN/Internet IP addresses to a local computer or device on your network and expose these computers or devices on your network to the Internet to allow anyone to access them. Your router includes the capability of forwarding all the ports and services available on the WAN/Internet IP side IP address and forwarding them to specified IP address (computers or network devices) on your network. © Copyright 2012 TRENDnet. 26 TRENDnet User's Guide Virtual Server Advanced Setup > NAT > Virtual Server Virtual Server (also called port forwarding) allows you to define specific ports (used or required by a specific application) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (see DMZ on page 25) in which DMZ forwards all ports instead of only specific ports used by an application. An example would be forwarding a port to an IP camera (TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on your network to be able to view it over the Internet. Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service (See DynDNS section). Log into your router management page (see "Access your router management page" on page 16). Click on Advanced Setup and click on NAT, then click on Virtual Server. · · TW100-BRF214 Private Port ­ Enter the port number required by your device. Refer to the connecting device's documentation for reference to the network port(s) required. Public Port ­ o Type ­ Select the protocol required for your device. TCP, UDP, or you can select Both to choose both TCP & UDP (recommended). Note: Please refer to the device documentation to determine which ports and protocols are required. o In the empty field, enter the port number used to access the device from the Internet. Note: The Public Port can be assigned a different port number than the Private Port (also known as port redirection), however it is recommended to use the same port number for both settings. Please refer to the device documentation to determine which ports and protocols are required. · Comment ­ You can enter a comment for the virtual server to make it more easily identifiable. 4. After the settings have been applied, click Continue on the following page. Note: If you would like to discard the changes, click Cancel before you click Apply. · · Enabled ­ Checking the Enabled option turns on the virtual server and unchecking the option turns off the virtual server. Private IP ­ Enter the IP address of the device to forward the port (use last IP address number such as 192. 168. 10. 101) Note: You should assign a static IP address to the device or use DHCP reservation to ensure the IP address of the device does not change. To modify an entry, next to the entry under Action in the list, click the notepad icon and the virtual server fields will populate with the settings of the entry. Then click Apply at the bottom of the page. To delete an entry, next to the entry under Action in the list, click the trash icon and click Apply at the bottom of the page. © Copyright 2012 TRENDnet. 27 TRENDnet User's Guide Example: To forward TCP port 80 to your IP camera 1. Access TRENDnet IP Camera management page and forward Port 80 (see product documentation) 3. [. . . ] If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]