User manual TRENDNET TV-IP672PI

[. . . ] TRENDnet User's Guide Cover Page TRENDnet User's Guide Table of Contents Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Preset Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SD Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Motion Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] There are three main sections: Trigger By: Always, Motion, Schedule, Video Clip Type: Configure the recording options Recording Type The two main sections here are Snapshot and Video. Snapshot takes a picture from your recorded data and only works with Profile 3. The larger your SD card the more storage space you have to record data. Target - Samba Network Device The Samba Network Device requires a NAS server or a Linux server to operate. Click the Anonymous radio button to allow anonymous users to send files to the Samba server. Then enter the Share Folder, Sub Folder (if needed) and enter the disk space needed. If you click the Account radio button then enter a Username and Password. This will authenticate the user every time they log on to the samba server. If you want to record data to an E-mail account click E-mail. © Copyright 2012 TRENDnet. 19 TRENDnet User's Guide The Trigger by and Video Clip settings are similar to the options under Recording. FTP Server ­ this is your default FTP server address Port ­ this is the default FTP Port (21) address Username ­ the username your FTP administrator provided Password ­ the password your FTP administrator assigned you Path ­ the directory Filename Prefix ­ the filename you are using to access the data or save the data to Interval ­ The default interval range is 60-86400. the time the server interacts with your camera Passive Mode ­ Server/client initiation access to bypass proxies. For Email TV-IP672P / TV-IP672PI Recipient E-mail Address ­ the email address you want to send information to SMTP Mail Server ­ the mail server domain details Port - the default Port number (25) Username ­ the username settings provided by your email administrator Password - the password settings provided by your email administrator Sender Email Address ­ the email address of the sender Send next email after ­ the alert email interval times Use SSL-TLS ­ this is a secure method (please consult your administrator before using this setting). If the test is a failure, the result will not be successful. © Copyright 2012 TRENDnet. 20 TRENDnet User's Guide Snapshot These settings control SNAPSHOT settings for your camera. The Trigger by settings is similar to settings above, so please view the settings above. The Snapshot Type provides for a Single snapshot or 6 snapshots at 1-2 second intervals. The Target FTP and Email settings are similar to settings explained above. Preset Position Preset Position TV-IP672P / TV-IP672PI This screen shows the software Pan/Tilt functions. On the right of the main screen is the Pan & Tilt dial 1. Under Preset Position ­ Enter a name in the field provided to give a name a position. To set a new Preset Position ­ Use the Pan & Tilt dial to select your Pan & Tilt speeds, and select the position. Click the Default Home button if you wish to use this configuration as your default home viewing area. [. . . ] If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]