User manual TRENDNET TU3-SA QUICK INSTALLATION GUIDE

[. . . ] Quick Installation Guide TU3-SA 1. 01 Table of Contents English 1. Accessing Hard Drives on TU3-SA Troubleshooting 1 1 2 4 5 Version 02. 15. 2011 1. [. . . ] Make sure that you have plugged in the power adapter into the unit and the power cord into an available power outlet. Access the device manager and verify the TU3-SA is installed properly. To access the device manager on Windows 7, click on the Windows icon on the bottom left-hand corner, click Computer, click System Properties and then click Device Manager. Make sure that USB Mass Storage Device is listed and there is no yellow question mark or exclamation point. To access the device manager on Windows Vista, right-click Computer, click Properties and then click Device Manager. Make sure that USB Mass Storage Device is listed and there is no yellow question mark or exclamation point. To access the device manager on Windows XP, right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. Make sure that USB Mass Storage Device is listed and there is no yellow question mark or exclamation point 4. For Windows 7/Vista, right click on Computer or My Computer and select Manage. When the Computer Management screen appears, click on Disk Management. For Windows XP, go to Start " Settings " Control Panel " Administrative Tools " Computer Management " Disk Management. Right click on the unallocated region of the hard drive and select New Partition. Note: Make sure that the selected hard drive is not your C or D drive. Also make sure that the selected hard drive is connected to the TU3-SA. [. . . ] Make sure that USB Device is listed and there is no yellow question mark or exclamation point. If you still encounter problems or have any questions regarding the TU3-SA, please contact TRENDnet's Technical Support Department. 5 Copyright ©2011, All Rights Reserved. [. . . ]