User manual TRENDNET TK-404KR

[. . . ] For TK-200: Connect PCs to K1, M1, VGA and K2, M2, VGA of KVM switch using standard extension Cable. PC1 PC2 M2 K2 VGA PC1 PC2 M2 K2 VGA PC1 PC3 PC2 PC4 VGA VGA 1 K/B 1 MOUSE 1 MOUSE 3 K/B 3 VGA 3 Model No: TK-404KR INTRODUCTION In situations where multiple PC Servers are installed, user can use KVM Switches to control multiple PCs with one Keyboard, one Monitor, and one Mouse. By using the KVM Switch, user saves on hardware cost, saves valuable space, and reduce energy consumption cost. [. . . ] By using the KVM Switch, user saves on hardware cost, saves valuable space, and reduce energy consumption cost. These advantages make the KVM Switch a must-have device in multiple Servers Environment. b. For TK-404KR: Connect PCs to Computer 1, Computer2, Computer 3, Computer 4 of KVM switch using standard PC extension cable. Do not press the push button on the KVM switch and do not use "Hot key" when PCs are booting up. OPERATION 1. One LED will lit red, meaning the console is controlling/monitoring to the PC that is connected to that specific port. Push button Press and then release the Port button: Selection Button once changes the selected port to the next port. Portable computers, such as, Laptop computers and Notebook computers, may not supply enough power to the KVM switch to make it function properly. In this case, please connect a DC 5V~9V, 500mA~1A AC Adapter to the power jack to compensate the lack of power. 2. Don't press any keys on the keyboard while the selected computers is booting up. This might cause "keyboard error" or "keyboard is not detected" error on the PC. 3. If the computer boots up fine, but keyboard doesn't work, please do the following: a . 4. If the Mouse is not detected after PC boots up, please do the following: a. [. . . ] This might cause "keyboard error" or "keyboard is not detected" error on the PC. 3. If the computer boots up fine, but keyboard doesn't work, please do the following: a . [. . . ]