User manual TRENDNET TEW-MP2U

[. . . ] 1 Table of Contents CHAPTER1 1. 1 1. 2 2. 1 2. 2 2. 2. 1 2. 3 2. 4 2. 4. 1 2. 4. 2 2. 5 3. 1 3. 2 3. 2. 1 3. 2. 2 3. 2. 3 3. 3 3. 3. 1 3. 3. 2 3. 3. 3 3. 3. 4 3. 3. 5 3. 3. 6 3. 3. 7 3. 3. 8 3. 4 3. 4. 1 3. 4. 2 4. 1 4. 2 4. 2. 1 4. 2. 2 4. 3 4. 4 4. 4. 1 4. 4. 2 4. 4. 3 4. 4. 4 4. 4. 5 4. 4. 6 4. 4. 7 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About 3 Models Described in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Click on the Specify button to specify SMB server Authentication. ii. Fill in the Workgroup, Server Name, User name and Password in Authentication window and then click on the OK button. iii. Click on the Forward button. 43 D. Networked CUPS (IPP): Fill in the Server's IP address and printer name then click the Forward button. Example: If your Server's IP address is 192. 168. 1. 100 and its printer name is psc 1300 ser. You can enter IP address in Server box as 192. 168. 1. 100 and printer name in Path box as psc 1300 ser. 7. Windows will display the Finish, and create the new print queue folder. 44 8. Click Finish button. 45 Chapter6 File Server This chapter describes the file server function of the Server which allows USB storage devices to be shared across a network by using SMB: NetBIOS over TCP/IP and FTP protocol. 6. 1 Preliminary 1. However, the "write" operation on NTFS is only supported in NetUSB mode. TRENDnet is not responsible for the loss or corruption of data in memory devices, including hard disk; TRENDnet is not responsible for the leak, manipulation, loss, or corruption of data in memory devices connected to the Server after unauthorized access. In order to use the USB Mass Storage device connected to the Server, the SMB protocol or FTP protocol must be set up. This product does not support to magnet optical drive devices such as CD/DVD. This product allows shared two USB storage devices over the network in Windows through the USB ports. This product does not support the USB devices through USB hub. 6. 2 Storage Names The local drives of the two storages in USB1 port and USB2 port are named as USBx_DxPx, where USBx represents the USBx port, Dx represents the the x-th Disk and Px represents the x-th partition. 6. 3 Connecting USB Mass Storage to the Server 46 6. 4 Supported Codepages - What is codepage? Used by the system to encode and interpret string characters. Some languages, such as Japanese have multibyte characters, while others, such as English and German, need only one byte to represent each character. - Filename Encoding of FAT File System This is known as an 8. 3 file name, a short file name using codepage encoding. The FAT file system also supports file names that can be up to 255 characters long. This is known as a long file name using Unicode (UTF-16) encoding. - When do you need to configure codepage? The Server supports Windows codepages. If users want to communicate files using FTP client tool or SMB on Windows 98/Me/2000 with the Server, they have to set their Server codepage to be same as the codepage that their Windows PC is using. SMB on Windows 98/ME/2000 - Configuring the Server's Codepages Users can use the following methods to set the Server's codepage. If the tool finds the Servers in your local area network, then you have to select one Server from the Server List. Double click the highlight list and enter the Server's administrator (default: admin) and password (default: admin). After you have logged in successfully, setting General Configuration dialog appears. 47 5. Login your administrator (default: admin) and password (default: admin). After you have logged in successfully, setting General Configuration dialog appears. 48 4. Select your codepage form File Server Codepage box and click Apply. 6. 5 Adding Your USB Mass Storages to Network with Security You can use the following protocols to share your USB Mass Storages with user level security in network: SMB/CIFS: NetBIOS over TCP/IP FTP The protocols are shown in Supported Protocols box of the Control Center or the Server's web pages. [. . . ] Go to "http://Server's IP address "or "http://Server's Server Name" to access the Server's home page. Login the Server with Administrator (default: admin) and Password (default: admin). Wait for 15 seconds for system reboot. Procedure C: Using the Init Button and the TFTP Client 87 1. Plug in the power adaptor while pressing the Init button until LED indicators of Power, USB1 and USB2 blink. [. . . ]