User manual TRENDNET TEW-826DAP

[. . . ] Ii TRENDnet User’s Guide TEW-826DAP Features TRENDnet’s high performance AC2200 Tri-Band PoE+ Indoor Wireless Access Point, model TEW-826DAP, features three concurrent WiFi bands to maximize device networking speeds: two separate high performance 802. 11ac networks (5GHz1: 867Mbps / 5GHz2: 867Mbps) , and a 400Mbps Wireless N network. MU-MIMO technology processes multiple data streams simultaneously, increasing real-time WiFi performance on the WiFi access point when multiple devices access the network. the WiFi access point features advanced access control , QoS , traffic management , band steering , and captive portal support. [. . . ] Push Button Configuration (PBC) method o WPS Software/Virtual Push Button - located in the management page  PIN (Personal Identification Number) Method - located in the management page Note: Refer to your wireless device documentation for details on the operation of WPS. For connecting additional WPS supported devices, repeat this process for each additional device. Log into your management page (see “Access the management page” on page 8). Click on the Wireless network you want to configure button (Wireless 2. Review the following WPS settings: WPS Config TEW-826DAP WPS: Select enable to turn on WPS feature WPS External Registrar Lock: Select to enable or disable external registrar feature on the select wireless band. 30 TRENDnet User’s Guide PIN: Enter the PIN information of the wireless client you want to connect to the network. Click Start PIN button to activate WPS once you enter the client’s PIN information Note: You may need to initiate the WPS PIN on your wireless device first when using this method. Refer to your wireless device documentation for details on the operation of WPS. Click on the Save button then click on the flashing Apply/Discard button located on the top left section, and click Save & Apply to apply the settings.  TEW-826DAP Note: Your configurations are not saved and applied until you click on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. 31 TRENDnet User’s Guide TEW-826DAP Configurations per band: Wireless Mode: If all of the wireless devices you want to connect with this Access Point can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate mode. If you have some devices that use a different transmission mode, choose the appropriate mode. B/G mixed: This mode only allows devices to connect to the access point using older and slow 802. 11g technology and it thereby reduces the access point’s maximum speed to 54Mbps (typically not recommended). This mode does ensure the highest speed and security for your network, however, if you have older 802. 11g wireless clients, they will no longer be able to connect to this access point.  G only: This mode only allows devices to connect to the access point using older and slower 802. B only: This mode only allows devices to connect to the access point using older and slower 802. Note: Please check the specifications on your wireless devices for the highest wireless capability supported first before applying these settings. If you are unsure, it is recommended that you keep the default setting (B/G/N mixed) for the best compatibility. 5GHz Wireless  A only: This mode only allows devices to connect to the access point using older and slower 802. [. . . ] Specific warranty periods are listed on each of the respective product pages on the TRENDnet website. Limited Lifetime Warranty TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015.  Cooling fan and internal power supply carry a one-year warranty TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]