User manual TRENDNET TEW-658BRM

[. . . ] This Modem Router combines the functionality of an ADSL modem and Internet gateway in one. It allows you to access the Internet and share resources such as printers, scanners, and files, via a wireless connection or through one of the Ethernet ports. The various security features, such as WPS, WPA2, SPI, and NAT, protect your data and privacy online. The web-based utility allows you to configure your Modem Router easily. Features · · · · · · · · · · · · · · · Compliant with ADSL G. dmt (G. 992. 1), G. lite (G. 992. 2) standards Compliant with ADSL2 G. dmt. bis (G. 992. 3) and ADSL2 + G. 992. 5 standards Up to Up to 24Mbps downstream, 1. 2Mbps upstream with ADSL2+ service IEEE 802. 11b/g/n infrastructure operating modes Supports TR069 remote management Supports web-based configuration Supports Command Line Interface (CLI) via Telnet Supports NAT, DHCP Supports VLAN and QoS Supports firewall protection Supports up to 8 permanent virtual circuits (PVC) Supports Wi-Fi Multimedia (WMM) Supports Wi-Fi Protected Setup (WPS) for easy connection Supports wireless data encryption with 64/128-bit WEP standard Supports enhance security for WPA-TKIP, WPA2-AES, WPA, and WPA2 Package Contents Check if your package contains the following items. [. . . ] The Virtual Server Config screen is displayed. Virtual Server -- Check this box to enable the virtual server function. Rule Name -- Enter a rule name or select an application name from the drop-down list on the right, then click the << button. If you select a predefined application name, the Public Port, Private Port, and Protocol Type are automatically configured. This is the port being used by applications within your local network. NOTE: The public and private ports are usually the same. Protocol Type -- Select the protocol from the drop-down list. IP Address -- Enter the local network IP address of the system hosting the server. Time Schedule -- Select a schedule when to use the virtual server or click the New Time Schedule button to create a new schedule. Click the Apply button to save your changes or click the Cancel button to discard your changes. Port Trigger This page displays the port trigger settings on your network. Port triggering is a type of port forwarding where outgoing data from specific ports are sent to specific incoming ports. To access the Port Trigger page, click Advanced > NAT > Port Trigger or click the Port Trigger button. The Port Trigger Config screen is displayed. Port Trigger -- Check this box to enable port triggering. Trigger Port -- Enter the port that will trigger the device to open ports for incoming data. Trigger Port Protocol -- Select the trigger port protocol from the drop-down list. Time Schedule -- Select a schedule to apply port triggering from the drop-down list or click the New Time Schedule button to create a new schedule. Click the Apply button to save your changes or click the Cancel button to discard your changes. ALG Application Layer Gateway (ALG) consists of a security component that augments NAT or a firewall. Your Modem Router allows NATs to support address and port translation for certain application layer protocols such as FTP, SNMP, and others. To access the ALG page, click Advanced > NAT > ALG or click the ALG Setting button. FTP -- File Transfer Protocol (FTP) is used to transfer files between computers on a TCP/IP based network, such as the Internet. Check this box to enable this function to work through your Modem Router. SNMP -- Simple Network Management Protocol (SNMP) is a network protocol used to monitor the devices connected to a network. Check this box to enable this function to work through your Modem Router. RTSP -- Real Time Streaming Protocol (RTSP) is a network protocol used for entertainment and communication systems to control streaming media sessions. Check this box to enable this function to work through your Modem Router. SIP -- Session Initiation Protocol (SIP) is a signaling protocol used to control multimedia communication sessions such as voice and video calls over Internet Protocol (IP). Check this box to enable this function to work through your Modem Router. [. . . ] 95% (non-condensing) CE, FCC Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-658BRM ­ 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. [. . . ]