User manual TRENDNET TEW-651BR

[. . . ] i Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] WAN IP Address: Select whether user wants to specify an IP address manually, or want DHCP to obtain an IP address automatically. When Specify IP is selected, type the IP address, subnet mask, and default gateway in the text boxes. IP Address: For the Specify mode, enter the specific IP address that provided by your ISP. Subnet Mask: For the Specify mode, enter the specific subnet mask that provided by your ISP. Gateway: For the Specify mode, enter the specific gateway IP address that provided by your ISP. DNS 1/2: Manually specific DNS server IP address; For the Obtain IP Automatically mode, if enter 0. 0. 0. 0 in this filed, the DHCP server will provides DNS server automatically. Clone MAC Address: If your ISP requires you to enter a specific MAC address, please enter it in. The Clone MAC Address button is used to copy the MAC address of your Ethernet adapter to the Router. 25 PPPoE If connected to the Internet using a PPPoE (Dialup xDSL) Modem, the ISP will provide a Password and User Name, and then the ISP uses PPPoE. WAN IP: Select the WAN IP address Obtain from ISP automatically or enter the specified IP address. DNS: Enter the IP address of specified DNS server here, default value 0. 0. 0. 0 is get the DNS settings from ISP. Autoreconnect: Select the connection type for Alwayson, Manual or Connecton Demand connecting. Idle Time Out: Enter the idle time out for Connect on Daemon, when no Internet access during the idle time, the PPPoE connection will auto disconnect. PPTP/L2TP with Dynamic IP If connected to the Internet using a PPTP/L2TP (Dialup xDSL) with dynamic IP connection, enter the your Server IP, PPTP/L2TP Account and PPTP/L2TP Password, if your ISP has provided you with a DNS IP address, enter it in the DNS field, otherwise, leave it zero. PPTP/L2TP with Static IP If connected to the Internet using a PPTP/L2TP (Dialup xDSL) with static IP connection, enter the your IP Address, Subnet Mask, Gateway IP address, DNS IP address, Server IP address, PPTP Account and PPTP Password. 27 BigPond Cable If your ISP is Big Pond Cable, the ISP will provide a User Name, Password, Authentication Server and Login Server IP (Optional). Password This screen enables users to set administrative and user passwords. These passwords are used to gain access to the WLAN Router interface. 28 Administrator: Type the password the Administrator will use to log into the system. The Administrator can also authorize users the ability to configure the WLAN Router. 29 Time This screen enables users to set the time and date for the WLAN Router's realtime clock, select properly time zone, and enable or disable daylight saving. Synchronize the clock with: Select the clock adjustment method form the drop down list. [. . . ] The repair/replacement unit's warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]