User manual TRENDNET TEW-624UB

[. . . ] Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized. When nearby persons has to be kept to ensure RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95. 1 standards, the distance between the antennas and the user should not be less than 20 cm. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. [. . . ] An easy-to-use utility is bundled with the Wireless USB Adapter for configuration, monitoring, and diagnostic purposes. The 300Mbps Wireless N USB Adapter can wirelessly transmit and receive data, at a speed of up to 54 megabits per second. The 300Mbps Wireless N USB Adapter provides users with access to real-time information anywhere in their organization. The mobility of the 300Mbps Wireless N USB Adapter provides productivity and service, which are not available under wired networks. The 300Mbps Wireless N USB Adapter can easily adapt from peer-to-peer networks, suitable for a small number of users, to full infrastructure networks of thousands of users that allow roaming around a broad area. Overview of this User's Guide Introduction. Helps you get started with the basic installation of the 300Mbps Wireless N USB Adapter. Lists the technical (general, physical and environmental) specifications of the 300Mbps Wireless N USB Adapter. 1 UNPACKING AND SETUP This section provides unpacking and setup information for the 300Mbps Wireless N USB Adapter. Unpacking The box should contain the following items: One TEW-624UB 300Mbps Wireless N USB Adapter One Driver & Utility CD-ROM One Multi-Language Quick Installation Guide If any item is found missing or damaged, please contact your local reseller for replacement. Setup Before installation, check the following: Make sure your computer is running at least a 300MHz or above processor with 256MB RAM or above Make sure the USB ports are is USB 2. 0 port The operating system on your computer must be the following: Windows 2000 (Service Pack 4), XP (Service Pack 2), Windows Vista A draft 802. 11n or 802. 11b/g access point. Make sure the environment has minimal interference and obstructions. Connecting the USB Extension Cable The USB extension cradle that comes with the Adapter has Type A connectors on both ends. One end of the cradle is a male Type A connector that plugs into the PC's USB port. The other end of the cradle is a female Type A connector that plugs into the Adapter. This USB extension cradle can be adjusted to improve the wireless connection. It is recommended that the 300Mbps Wireless N USB Adapter is perpendicular to the ground. 2 SOFTWARE INSTALLATION This section describes how to install the driver and utility for the 300Mbps Wireless N USB Adapter. Windows Based Utility Installation 1) Insert the Utility and Driver CD-ROM into your computer's CD-ROM Drive and then click Install Utility. 2) Follow the InstallShield Wizard Instructions 3 3) Click Finish to restart the computer. 4) Plug the 300Mbps Wireless N USB Adapter into an available USB slot on your computer Wireless Utility Setting The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar. The Wireless Adapter Configuration Utility is divided into five sections: Link Info, Configuration, Advanced, Site Survey and About. 4 I. Link Information This is the default screen after launching the Utility program. Status: Shows the associated BSSID, which can be used to identify the wireless access point. SSID: Shows the current SSID, which must be the same on the wireless client and AP in order for communication to be established. Wireless Mode: Shows the current wireless mode used for wireless communication. Encryption: Shows the current encryption mode used on the wireless network. Signal Strength: Shows the wireless signal strength of the connection between the 300Mbps Wireless N USB Adapter with the Access Point. Data Rate: Shows the statistics of data transfer, and the calculation is based on the number of packets transmitted and received. II. Configuration 5 This screen is where you set the basic wireless settings for the 300Mbps Wireless N USB Adapter SSID: Service Set Identifier, which is a unique name shared among all clients in a wireless network. Wireless Mode: There are two modes available for selection Infrastructure ­ to establish wireless communication with the LAN and other wireless clients through the use of Access Points. Ad-Hoc ­ to establish point-to-point wireless communication directly with other wireless client devices. [. . . ] TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. [. . . ]