User manual TRENDNET TEW-453APB

[. . . ] TABLE OF CONTENTS CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features of your Wireless Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Physical Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This Access Point will then send updates according to the specified time period. This will always be "Disabled", because Radius MAC Authentication is not available with WPA802. 1x. The Configure button for this feature will also be disabled. 30 Access Point Setup UAM The current status is displayed. This will always be "Disabled", because UAM is not available with WPA-802. 1x. The Configure button for this feature will also be disabled. 31 Wireless Access Point User Guide Security Settings - 802. 1x This uses the 802. 1x standard for client authentication, and WEP for data encryption. If possible, you should use WPA-802. 1x instead, because WPA encryption is much stronger than WEP encryption. If this option is selected: · · · · This Access Point must have a "client login" on the Radius Server. You only have to select the WEP key size; the WEP key is automatically generated. Figure 19: 802. 1x Wireless Security 32 Access Point Setup Data - 802. 1x Screen 802. 1x Radius Server Address Radius Port Client Login Name Enter the name or IP address of the Radius Server on your network. This read-only field displays the current login name, which is the same as the name of the Access Point. Select the desired option: · · · Dynamic WEP Key 64 Bit - Keys are 10 Hex (5 ASCII) characters. 152 Bit - Keys are 32 Hex (16 ASCII) characters. Shared Key WEP Key Size Click this if you want the WEP keys to be automatically generated. The following Key Exchange setting determines how often the keys are changed. Both Dynamic and Static keys can be used simultaneously, allowing clients using either method to use the Access Point. Key Exchange This setting if only available if using Dynamic WEP Keys. If you want the Dynamic WEP keys to be updated regularly, enable this and enter the desired lifetime (in minutes). Enable this if some wireless clients use a fixed (static) WEP key, using EAP-MD5. Note that both Dynamic and Static keys can be used simultaneously, allowing clients using either method to use the Access Point. Enable this if you want this Access Point to send accounting data to the Radius Server. If enabled, the port used by your Radius Server must be entered in the Radius Accounting Port field. Static WEP Key (EAP-MD5) WEP Key WEP Key Index Radius Accounting Update Report every . . . If Radius accounting is enabled, you can enable this and enter the desired update interval. This Access Point will then send updates according to the specified time period. 33 Wireless Access Point User Guide Radius MAC Authentication UAM The current status is displayed. Click the Configure button to configure this feature if required. 34 Access Point Setup System Screen Click System on the menu to view a screen like the following. Figure 20: System Screen Data - System Screen Identification Access Point Name Description Country Domain IP Address DHCP Client Fixed Select this option if you have a DHCP Server on your LAN, and you wish the Access Point to obtain an IP address automatically. · · · · IP Address - The IP Address of this device. Select the country or domain matching your current location. 35 Wireless Access Point User Guide WINS Enable WINS WINS Server Name/IP Address If your LAN has a WINS server, you can enable this to have this AP register with the WINS server. [. . . ] The CLI requires either a Telnet connection or a physical connection from your PC to the serial port (RS232 port) on the Wireless Access Point. Using the CLI - Telnet 1. Start your Telnet client, and establish a connection to the Access Point. Telnet 192. 168. 0. 228 You will be prompted for the user name and password. Enter the same login name and password as used for the HTTP (Web) interface. [. . . ]