User manual TRENDNET TEG-S16DG QUICK INSTALLATION GUIDE

[. . . ] there is proper heat dissipation and adequate ventilation around Make sure that the Switch ?heavy objects on the switch Do not place 1 2. Connect the Power Cord to the TEG-S16Dg/TEG-S24Dg and then to a power outlet. 2. Connect a Cat. 5e or Cat. 6 RJ-45 network cable from the computer to an available Ethernet port on the TEG-S16Dg/TEG-S24Dg. 3. [. . . ] Make sure that you have a Gigabit Ethernet Adapter installed on your computer. The minimum length of the cable is 1. 5 meters and the maximum length of the cable is 100 meters. After I connect my PCs to the Switch, I can only get onto the Internet from one computer. The Switch was not designed to share Internet between multiple computers. Since all the ports on the Switch are Auto-MDIX, any of the ports can be used as an uplink port. If you still encounter problems or have any questions regarding the TEG-S16Dg/TEG-S24Dg please contact TRENDnet's Technical Support Department. 5 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEG-S16Dg/TEG-S24Dg - 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a Return Material Authorization (RMA) number will be issued. An RMA number is required in order to initiate warranty service support for all TRENDnet products. Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. [. . . ] Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Go to http://www. trendnet. com/gpl or http://www. trendnet. com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. [. . . ]