User manual TRENDNET TE100-PS1U

[. . . ] 1 Product Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Application Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Restart device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Enabling the Auto-Connect Printer feature will avoid the complexity of having to manually connect and disconnect from the printer for each computer when multiple computers are sending print jobs to the USB printer. Click Auto-Connect Printer. 10 TRENDnet User's Guide Connect to a Scanner 2. Select the assigned printer to use as the auto connect printer by checking the box. When you are finished, click Apply. TE100-PS1U Note: This function applies to stand-alone USB scanners or USB scanners included with multi-function printers. It is required that the scanner drivers are installed before your computer is able to scan. If the scanner drivers are not installed, please refer to your printer manufacturer website or documentation on where to download and how to install the scanner drivers. Before installing the scanner drivers, connect your computer to the printer using the USB utility first. Some scanners may require that the scanner is directly connected to the computer in order to complete the driver installation. Select the scanner or multi-function printer with scanning capability listed in the utility. Once your computer is connected, you can receive scanned files from the scanner. 4. After you have finished printing, click Disconnect, to make the scanner available to other computers on your network that use the scanner. © Copyright 2011 TRENDnet. The device can be discovered under your computer's network map 1. Log into the management page (see "Access the management page" on page 11). Click on General tab and scroll down to the UPnP section © Copyright 2011 TRENDnet. 7. TE100-PS1U Under Permission section select the type of access you would like to permit user accounts with; Read Only or Read-Write. To delete a user account, select the user account you would like to delete. 3. 5. Under Administrator section enter your new username information. Under New Password and Re-Type Password section, enter your new password information. Click the Delete button to permanently remove selected user account. Change User Account Setting Administrator A user account does not have the ability to make changes to the device settings. You can assign a user account's password information by following the steps below. You can add a user account and assign both username and password for each user accounts by following the steps below. Note: Changes to these settings are case sensitive and should be written down somewhere and stored. [. . . ] In MAC 10. 6, from the Configure drop-down list, select Using DHCP and click the Apply button. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. TE100-PS1U © Copyright 2011 TRENDnet. 21 TRENDnet User's Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TE100-PS1U ­ 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. [. . . ]