User manual TRENDNET TE100-P1P

[. . . ] TABLE OF CONTENTS ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Windows will then ask for a name for the new printer, and ask whether or not you want to set the printer as the Windows default printer. Windows may ask you whether or not you wish to print a test page to make sure that the printer will work correctly. When the test page is done printing, you will be asked whether or not the test page printed. Setting TCP/IP Printing Settings The lpr client's Properties dialog allows you to change several of the client's settings. From the Start menu, choose the Settings submenu, then the Control Panel item within it. Choose the LPR for TCP/IP Printing client and click the Properties button. 4. Click on the Settings tab to access the lpr client settings. Change the settings as necessary, and press OK to let the changes take effect. The parameters are as follows: Communication Timeout Determines how long, in seconds, the system will wait before determining that it has lost connection with lpr/lpd print servers. Retry Interval Determines how long, in seconds, the system will wait before retrying a lost connection. Retry Times Determines how many times the system will retry a lost connection with an lpr/lpd print server. Spool Path Gives the directory path where the system will temporarily store lpr/lpd print server job files. 6 PRINTING IN WINDOWS 7/VISTA/XP/2000 Setting Up Windows 7/Vista TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows Vista. Click Start > Control Panel > Printers Click "Add a Printer" Click "Add a local printer" Select Create a new port, select Standard TCP/IP Port and then click Next. Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click "Next". Hint: You can get the Port name from the print server's system information through web browser. Please refer page 25-26. Select "Custom", and click "Settings". Select "LPR", and put the Port name in the field labeled "Queue Name". Then Click "OK". Click "Next". The Printer Install Wizard will now prompt for drivers. Select the correct Make and Model, or click "Have Disk", to provide the Manufacturer's Driver Disk. Click "Next". Select a "Printer Name". A Test Page can be printed to confirm proper configuration. Once a test page has been sent to your printer, click Close. Click Finish. Setting Up Windows XP TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows XP. Click Start > Printer and Faxes Double Click "Add a Printer" Click "Next" Select "Local Printer" Create a new "Standard TCP/IP Port" Click "Next" Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click "Next". Hint: You can get the Port name from the print server's system information through web browser. Please refer page 21. Select "Custom", and click "Settings". Select "LPR", and put the Port name in the field labeled "Queue Name". Then Click "OK". Click "Next". Click "Finish" The Printer Install Wizard will now prompt for drivers. Select the correct Make and Model, or click "Have Disk", to provide the Manufacturer's Driver Disk. Click "Next". Select a "Printer Name". A Test Page can be printed to confirm proper configuration. When testing page is done, click "finish" to complete the installation. Setting Up Windows 2000 TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows 2000. Double Click "Add Printer" Select "Local Printer" Create a new "Standard TCP/IP Port" Click "Next" Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click "Next". Hint: You can get the Port name from the print server's system information through web browser. [. . . ] The printer is installed into the system successfully. LIMITED WARRANTY TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TE100-P1P ­ 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. [. . . ]