User manual TRENDNET TBW-105UB

[. . . ] Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Double click My Bluetooth Places, click Bluetooth from the menu bar and select search for devices. Double-click on the desired Bluetooth device to display a list of services. 37 2. Configure The Bluetooth Configuration Panel Client Applications Bluetooth Serial Port General tab provides the following configurable options: 36 Configure The Bluetooth Configuration Panel Client Applications Dial-up Networking General tab provides options to configure: The application name -- to change it, highlight the existing name and enter the new name. The Bluetooth virtual device to be used. The application name -- to change it, highlight the existing name and enter the new name. To enable secure connection, place a checkmark in the box. Headset Overview The Headset application allows this computer to use a Bluetooth headset (or any other device that offers the Bluetooth headset service) as the audio input and output device for this computer. Possible uses include: If this computer has on-board telephone hardware, a Bluetooth headset might be used as the audio input/output device to make/receive telephone calls. If this computer has voice recognition capabilities, a Bluetooth headset might be used as the audio input device. Any other scenario that requires audio input/output can potentially take advantage of a Bluetooth headset to replace a hardwired microphone and/or speakers. Create a Headset connection Establish a connection using one of these techniques: System tray, Bluetooth icon From My Bluetooth Places Using the Bluetooth Setup Wizard FAX Overview The Bluetooth Fax service allows this computer to send a fax using a Fax/ Modem that is physically connected to a remote device. Open a connection to the Fax service that is provided by another Bluetooth device, using one of these techniques: System tray, Bluetooth icon From My Bluetooth Places Using the Bluetooth Setup Wizard 2. Open or create the document to be faxed and select the "Print", "Send to Fax Recipient" or similar command that is available in most applications. Close a Fax Connection Fax connections close automatically when the Fax transmission is complete. Configure The Bluetooth Configuration Panel tab provides options to configure: Client Applications Fax General NOTE: Most Bluetooth headsets "ring" when a connection is attempted; answer the ring to complete the connection and begin using the headset as the audio input/output device for this computer. 39 38 Close a Headset connection There are two ways to close a Headset connection: 1. If the connection was established via the Bluetooth icon in the System tray; click the Bluetooth icon, select Quick Connect, Headset and then select the device that is providing the service (active connections have a checkmark in front of them). Double click My Bluetooth Places, click Bluetooth from the menu bar and select search for devices. Double-click on the desired Bluetooth device to display a list of services. Right click on the service and click disconnect. Drag-and-drop any file or folder within the Public Folder of the remote device to the desired folder on this computer. You can also drag-and-drop files or folders from this computer to the Public Folder (and its sub-folders) of the remote device. Other file operations Right-click a file or folder in the remote device's Public Folder for a list of menu options. Menu options include: Open -- opens the selected file on this computer, using the default application for this file. Print -- sends the selected file to this computer's default printer. 2. Configure The Bluetooth Configuration Panel Client Applications General tab provides options to configure: The application name enter the new name. [. . . ] After a link key is generated, manual entry of the passkey is not required. Authorization Authorization is Yes-or-No security that requires operator intervention to avoid having the connection time out and fail. Authorization is limited to: Yes, you may connect (click the balloon to proceed). No, you may not connect (ignore the balloon prompt and the connection will fail). Pairing Devices Pairing allows you to avoid entering access information each time a connection is attempted. Paired devices share a unique link key, which they exchange each time they connect. [. . . ]