User manual TRANSCEND TS64MJF2B

[. . . ] Simply plug JetFlash into an available USB port, and Windows will install the files needed to use your device. A new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window. Driver Installation for Mac OS 9. 0 or Later No driver is required. Just plug JetFlash into an available USB port and your computer will automatically detect it. A new Disk icon will appear on the Desktop. Driver Installation for Linux Kernel 2. 4 or Later No driver is required. [. . . ] Input the Old Password and enter the new password in both the New Password and the Confirm New Password fields. Select OK to close this window. If You Forget the Password When you forget the password, you can use the password hint to remember it. If you cannot recall the password using the password hint, then all you can do is run the U-Storage Tool again to Unfortunately, all data of the data will be lost during this procedure. You will have the chance to make a backup copy of your data in the "Public Access, " but all data in PC-Lock Function Once the PC-Lock function is enabled, you can use your JetFlash as the key to lock your computer to protect it from being used by others. The PC-Lock function is not supported in Mac and Linux Operating Systems. To use the PC-Lock function, you must login into the Windows OS with Administrator rights. PC-Lock Function for Windows 98SE, Me, 2000, and XP 1. Plug your JetFlash into an available USB port of your computer and select the U-Storage Tool button. 2. button to enable the PC-Lock function. Select the Lock Expired Time and select the Start 4. The icon will appear in the system tray to show that the PC-Lock function is enabled. Lock Your Computer After the PC-Lock function is enabled, your computer will be locked whenever you remove your JetFlash. If your computer is locked, the screen will display the locked status as below. If you want to lock your computer after shutdown, you must turn off your computer before you remove your JetFlash. 10 Unlock Your Computer To unlock your computer, you must re-plug your JetFlash. To disable the PC-Lock function, right-click on the Host Lock to turn off this function. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Plug your JetFlash into an available USB port of your computer, and then select the U-Storage Tool button. 14 6. The U-Storage window will appear. Select Create Boot Disk button. 7. The Create Boot Disk window will appear. Select USB ZIP and Select OK. USB-HDD boot-up type is not supported in Windows XP. Be sure you have made a backup of all the files on your Select Yes to continue or No to exit. 9. Select OK to close the window. JetFlash is now ready for use as an MS-DOS Boot When you have completed this process, JetFlash will contain the files needed to use the Boot-up function. 15 Recovery Function If your JetFlash is ever damaged, you can use the Recovery program to restore its default settings. The Recovery function is not supported in Mac and Linux Operating Systems. To use the Recovery function, you must login into the Windows OS with Administrator rights. Running the Recovery program will erase all of the data on your JetFlash. If there are bad blocks in the flash memory chip of JetFlash, the memory size of JetFlash after running the Recovery program will be smaller than the original memory size. [. . . ] Transcend JetFlash must be used with devices that conform to the recommended industry standards. Transcend will not be liable for damages resulting from a third-party device that causes the Transcend product to fail. Transcend shall in no event be liable for any consequential, indirect, or incidental damages, lost profits, lost business investments, lost goodwill, or interference with business relationships as a result of lost data. Transcend is also not responsible for damage or failure of any third-party equipment, even if Transcend has been advised of the possibility. [. . . ]