User manual TRANSCEND TS256MFLRD7

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TRANSCEND TS256MFLRD7. We hope that this TRANSCEND TS256MFLRD7 user guide will be useful to you.

TRANSCEND TS256MFLRD7 : Download the complete user guide (816 Ko)

You may also download the following manuals related to this product:

   TRANSCEND TS256MFLRD7 (820 ko)
   TRANSCEND TS256MFLRD7 (821 ko)
   TRANSCEND TS256MFLRD7 (826 ko)
   TRANSCEND TS256MFLRD7 (1305 ko)
   TRANSCEND TS256MFLRD7 (813 ko)
   TRANSCEND TS256MFLRD7 (852 ko)
   TRANSCEND TS256MFLRD7 (1018 ko)

Manual abstract: user guide TRANSCEND TS256MFLRD7

Detailed instructions for use are in the User's Guide.

 [. . . ] 6

To Safely Remove the Multi-Card Reader
To Remove in Windows 98/98SE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 To Remove in Windows 2000,  Me,  and XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 To Remove in Mac OS and Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  [. . . ] Restart the computer to complete the installation process. 

To Use the Multi-Card Reader
Secure Digital,  miniSD (with adapter),  MultiMediaCard,  RS-MMC (with adapter),  Memory Stick,  Memory Stick PRO,  Memory Stick Duo (with adaptor) and Memory Stick PRO Duo (with adaptor) use the same slot on the Multi-Card Reader. Only one type of media can be used in this slot at a time. 

To Use with Windows 98/98SE and 2000
1. Connect the Multi-Card Reader to an available USB port directly (or via the USB extension cable). Your computer automatically recognizes the Multi-Card Reader and shows the "New Hardware Found" message boxes. Four Removable Disk drives with newly assigned drive letters appear in My Computer. The Multi-Card Reader is ready for use. 

For the Multi-Card Reader with 0MB Flash Disk,  only three newly assigned Removable Disk drives appear in My Computer. To safely remove the memory card,  you must make sure that no LED is blinking (no data are being transmitted). WARNING: Never remove or insert a memory card or disconnect the USB cable while data are being transmitted. To avoid improper shutdown,  open the transmitted file from its new location to ensure transmission has been completed. 

To Use with Windows Me and XP
The Multi-Card Reader is a driver-free device for Windows Me and Windows XP. You can connect it to an available USB port directly (or via the USB extension cable) and don't have to install a special driver. Windows Me and Windows XP will detect the device and automatically install all the associated files required for its use. The process sequence is listed below:

4

Four Removable Disk drives with newly assigned drive letters appear in My Computer. The Multi-Card Reader is ready for use. 

For a Multi-Card Reader with 0MB Flash Disk,  only three newly assigned Removable Disk drives appear in My Computer. To safely remove the memory card,  you must make sure that no LED is blinking (no data are being transmitted). WARNING: Never remove or insert a memory card or disconnect the USB cable while data are being transmitted. To avoid improper shutdown,  open the transmitted file from its new location to ensure transmission has been successful. 

5

To Use with Mac OS 9. x
1. Connect the Multi-Card Reader to an available USB port directly (or via the USB extension cable). With a built-in Flash Disk (128MB or 256MB),  you can use the Multi-Card Reader as if it were a Mac HardDisk without a memory card inserted.  [. . . ] Your computer automatically detects the Multi-Card Reader. 

6

3. 

Create a directory for the Multi-Card Reader. Example: mount ­a ­t msdos /dev/sda1 /mnt/CardReader

Mapping of Disks: For Multi-Card Reader with 0MB Flash Disk: SmartMedia MMC/SD/MS CF/Microdrive Built-in Flash SmartMedia MMC/SD/MS CF/Microdrive /dev/sda /dev/sdb /dev/sdc /dev/sda /dev/sdb /dev/sdc /dev/sdd

For Multi-Card Reader with 128MB or 256MB Flash Disk:

To safely remove the memory card,  unmount the device from the Linux environment. Example: umount /mnt/CardReader

WARNING: Never remove or insert a memory card or disconnect the USB cable while data are being transmitted. To avoid improper shutdown,  open the transmitted file from its new location to ensure transmission has been successful. 

To Safely Remove the Multi-Card Reader
To Remove in Windows 98/98SE
Make sure that no LED is blinking (no data are being transmitted).  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TRANSCEND TS256MFLRD7

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TRANSCEND TS256MFLRD7 will begin.