User manual TRANSCEND TS0MFLRD8B

[. . . ] Power on the computer where you will install the Internal Multi-Card Reader and make sure the USB port is enabled and working properly. Do not plug your Internal Multi-Card Reader into the USB port at this time. Select the Driver button to If the Auto-Run window does not appear, run CardRead. exe in the root di- 3. The Card Reader Setup window will appear, then select the Next button to continue. 4. [. . . ] Connect the USB connector of the Internal Multi-Card Reader to the USB pin-header on the motherboard. The hardware setup is complete. To Use the Internal Multi-Card Reader After the driver installation and hardware setup is complete, you can power on the computer and start to use your Internal Multi-Card Reader. To Use with Windows 98SE and 2000 1. The New Hardware Found window will appear (the first time you power on the computer after installing the Internal Multi-Card Reader). 6 2. Four Removable Disk drives with newly assigned drive letters will appear in My Computer. The Internal Multi-Card Reader is ready for use. To Use with Windows Me and XP 1. The Found New Hardware status message will appear (the first time you power on the computer after installing the Internal Multi-Card Reader). Four Removable Disk drives with newly assigned drive letters will appear in My Computer. The Internal Multi-Card Reader is ready for use. To Use with Linux Kernel 2. 4 or Later The Internal Multi-Card Reader is a driver-free device for Linux kernel 2. 4 or later. Power on the computer and insert a memory card into the Internal Multi-Card Reader. 2. Mount the Internal Multi-Card Reader. Example: mount ­a ­t msdos /dev/sda1 /mnt/CardReader No matter how many memory cards are inserted into the Internal Multi-Card Reader, only the memory card that was first inserted can be mounted. To Safely Remove Memory Cards To Remove in Windows Make sure that the LED is not blinking (no data is being transmitted). You can then safely remove Removal of a memory card while data is transferring may cause damage to the card and the system to halt. To Remove in Linux Unmount the device from the Linux environment. Example: umount /mnt/CardReader You can then safely remove the memory card. Never remove or insert a memory card while data is being transmitted. completed. To avoid improper shutdown, open the transmitted file from its new location to ensure transmission has been 8 Specifications Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 5V from USB port Slots for Storage Media:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CompactFlash Card Type I/II Microdrive SmartMedia Card Secure Digital Card miniSD (with adapter) MultiMediaCard RS-MMC (with adapter) Memory Stick Memory Stick PRO Memory Stick Duo (with adapter) Memory Stick PRO Duo (with adapter) Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C­40°C Storage Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10°C­60°C Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0%­90% RH Emission/Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Class B, CE, BSMI Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102mm x 102mm x 26mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Transcend is also not responsible for damage or failure of any third party equipment, even if Transcend has been advised of the possibility. This limitation does not apply to the extent that it is illegal or unenforceable under applicable law. Disclaimer: The foregoing limited warranty is exclusive, with no other warranties implied or statutory, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. This warranty is not affected in any part by Transcend's providing technical support or advice. [. . . ]