User manual TRANSCEND STOREJET 18M

[. . . ] 9 Removing the StoreJet® 18 in LinuxTM Kernel 2. 4, or Later . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Formatting the Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Windows® 2000/XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Windows® 7/Vista. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Transcend Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Introduction Congratulations on purchasing Transcend's StoreJet® 18 mobile. [. . . ] *On some older computers, the power supplied by the USB port is below the required 5V DC power. In this instance, please connect the spare large connector on the provided USB Y-cable to a second USB port on the computer. This will provide the additional power necessary to run the drive. Figure 4: Connecting to a Computer 7 3. When the StoreJet® 18 is successfully connected to a computer, the StoreJet®'s Power LED will light up, a new Local Disk drive with a newly-assigned drive letter will appear in the My Computer window, and a Removable Hardware icon ® will appear on the Windows System Tray. The StoreJet 18's internal hard drive comes pre-formatted for FAT32. Figure 5: *F: is an example drive letter, the letter in your "My Computer" window may differ 4. Once connected, you can use the StoreJet® 18 as an external hard drive to transfer data to and from your computer. Simply drag and drop files or folders onto the Local Disk drive letter that represents the StoreJet® 18. 5. If you have installed the bundled StoreJet® elite software, you can press the StoreJet® 18's OneTouch "Backup Button" to instantly backup your data (see the StoreJet® elite Software User's Manual for details). Figure 6: OneTouch Auto-Backup Button 8 Disconnecting from a Computer NEVER disconnect the StoreJet® from a Computer when its LED is flashing. Removing the StoreJet® 18 in Windows® 1. A window will appear stating, "The `USB Mass Storage Device' device can now be safely removed from the system. " Figure 8: Safe to Remove Hardware WARNING!To prevent data loss, always use this procedure to remove the StoreJet® from Windows®. Removing the StoreJet® 18 in Mac® OS 9. 0, or Later Drag and drop the Disk icon that represents your StoreJet® 18 into the trashcan. Then unplug your StoreJet® 18 from the USB port. Removing the StoreJet® 18 in LinuxTM Kernel 2. 4, or Later Execute umount /mnt/StoreJet to un-mount the device. Then unplug your StoreJet® 18 from the USB port. 9 Formatting the Hard Drive WARNING!Formatting the disk will erase all of the data on your StoreJet® 18. You must have Administrator Rights to format in Windows. Windows® 2000/XP 1. Download the StoreJet® Format Utility from Transcend's online Download Center at http://www. transcendusa. com/Support/DLCenter/index. asp (the software can be located by selecting "Storage Devices -> StoreJet® Drives -> any StoreJet® product -> any StoreJet® model) 2. When the download is complete, extract the downloaded ZIP file to your computer's hard drive (not the StoreJet® 18) and run the StoreJetFormatter. exe application. Plug the StoreJet® 18 into an available USB port on a Windows® 2000/XP computer. In the StoreJet® Format Utility window, click the "Refresh" button. The program will automatically detect the StoreJet® 18 drive. Figure 8: The Utility will automatically detect the StoreJet® 18 drive 7. Press "Start". 10 Figure 9: Press "Start" 8. When complete, an "O. K. " message will appear in the bottom right hand corner of the window. Figure 10: Format Complete 10. Click the "Close" button to finish and exit. Windows® 7/Vista 1. [. . . ] Transcend will not be liable for damages resulting from a third party device that causes the Transcend StoreJet® 18 to fail. Transcend shall in no event be liable for any consequential, indirect, or incidental damages, lost profits, lost business investments, lost goodwill, or interference with business relationships as a result of lost data. Transcend is also not responsible for damage or failure of any third party equipment, even if Transcend has been advised of the possibility. This limitation does not apply to the extent that it is illegal or unenforceable under applicable law. [. . . ]