User manual TRANSCEND MP330 MANUAL

[. . . ] User's Manual Digital Music Player MP330 Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press to confirm the new EQ setting. User EQ Customization The User EQ allows you to customize the 5-band equalizer to your personal preference. In the EQ menu, use / to select "User EQ" and press . 3. Use the / buttons to switch between 5 bands: 80Hz, 250Hz, 1KHz, 4KHz, and 12KHz. The "ALL" setting move all 5 bands up or down together. 4. Press / to increase or decrease levels of each frequency range. 5. Press to save the new User EQ settings and return to the SETTINGS menu. 22 Repeat Mode There are seven Repeat modes to choose from: Normal Repeat One Repeat All Shuffle (plays all music files available one time, in consecutive order) (continuously repeats the current song), (continuously repeats playback of all music files available, in consecutive order) (continuously repeats playback of all music files available, in random order) Normal in Folder (plays all music files in a folder one time, in consecutive order) Repeat in Folder (continuously repeats playback of all music files in a folder, in consecutive order) Shuffle in Folder (continuously repeats playback of all music files in a folder, in random order) 1. Use the / buttons to select a repeat mode and press to confirm. Play Speed The speed at which an audio file is played can be increased or decreased. Playback speeds can be set to: 0. 50X, 0. 75X, 1. 00X, 1. 25X, 1. 50X, 1. 75X, 2. 00X. Use / to select one of the 7 playback speed settings and press to confirm. REC Settings In the SETTINGS menu, use / to select "REC Settings" and press . Record Source Select between MIC (Built-In Microphone) or LINE-IN (for CD Players or other sources) as the Audio Recording method used by the MP330. Use the / buttons to select MIC or Line-In and press 23 to confirm. Record Quality The quality of an audio recording can be set to Low, Medium, or High. Higher recording quality settings require more memory space to save the recorded WAV files. Use / to switch between "Low", "Medium", or "High" and press to confirm. Maximum Record Time / Quality Table Record Quality FM / Line-In Recording Low (32 Kbps) Med (48 Kbps) High (64 Kbps) 2GB 128 hrs 85 hrs 64 hrs 4GB 256 hrs 170 hrs 128 hrs 8GB 512 hrs 340 hrs 256 hrs Record Quality MIC Recording Low (32 Kbps) Med (48 Kbps) High (64 Kbps) 2GB 128 hrs 85 hrs 64 hrs 4GB 256 hrs 170 hrs 128 hrs 8GB 512 hrs 340 hrs 256 hrs Note: The above recording times may not be possible if space is limited or the battery power is low. VAD (Voice Activity Detection) VAD allows the MP330 to make gapless voice recordings. This means during voice recording with the internal microphone, the player will only record when it detects voices. If the person(s) pauses or stops speaking, the MP330 will temporarily stop recording until the person(s) starts speaking again. This allows for more concise, easier to understand recordings and smaller recording files. In the REC Settings menu, use / to select "VAD" and press . 2. Use / to switch between "Enable" or "Disable" and press . 24 Contrast The contrast of the OLED display can be adjusted for brighter or darker text. Higher contrast levels will drain the battery faster, while lowering the contrast level will provide better battery life. Press to confirm the new contrast Screen Saver This function lets you enable/disable the screen saver, choose which screen saver you want to be displayed, and set the time delay for the screen saver to activate. Use / Available screen savers are: (Displays an all-black screen to save battery life) (Displays the current real time) to select the "Screen Saver" and press . 2. The screen saver will commence whenever this amount of time passes with no button activity. Available delay timers are: "Disable", "10 sec", "20 sec", and "30 sec". 3. After you select a Screen Saver time delay, a list of available screen savers will appear. [. . . ] Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potential negative consequences on the environment and human health. Battery Disposal: Your product contains a built-in rechargeable battery covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. [. . . ]