User manual TP-LINK TF-3239DL

[. . . ] Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Supports ACPI, PCI power management Complies with the IEEE802. 3u Fast Ethernet, 100Base-TX standard and IEEE802. 3 CSMA/CD 10Base-T standard Supports Full Duplex Flow Control (IEEE 802. 3x) Full duplex design to double the performance Supports Auto-Negotiation function Auto-setups IRQ and I/O address Contains two large (2Kbyte) independent receive and transmit FIFOs One STP/UTP connector for 10Mbps or 100Mbps network Speed Provides diagnostic software and one LED to indicate network Link/activity Supports smart remote boot ROM and provides the help for RPL/PXE(Exclude TF-3239DL) Supports ODI Driver for NetWare 3. x, 4. x, NDIS Driver for LAN Manager, Windows 95, Windows NT, Windows 2000, Packet driver for TCP/IP Use the drivers supplied by the diskette included in The Product. For detail description, please refer to "help" in the diskette provided by the Product. I/O Address: Assigned by system Software: ODI driver for NetWare 3. x, 4. x, NDIS driver for Microsoft LAN manager and Windows 98, Windows ME, Windows NT, Windows 2000 Packet driver for TCP/IP Temperature: 0o C to 40o C (Operating) Humidity: 5% to 95% (Non-condensing) Power consumption: 1W(Max) 71030429 Appendix A: Troubleshooting If you experience any problems with the adapter, first make sure the appropriate driver is loaded, the proper cable is connected to the adapter port and the hub complies with the adapter specification, such as 10Mbps 10Base-T or 100Mbps 100Base-TX. The Product provided one LEDs to indicate network status. User's Guide Appendix C: Contact Information For help with the installation or operation of the TP-LINK TF-3239D/ TF-3239DL Adapter, please contact us. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Thank you for purchasing TF-3239 series 10/100M Fast Ethernet Adapters. This guide is to provide the installation and usage of the Products for network installers or users. The Product complies with PCI 2. 1/2. 2 specification and supports half/full duplex feature which can double network speed. The Adapters support both 10Mbps and 100Mbps network speed, 100Base-TX operates on twisted pairs of Category 5 UTP and 10BaseT operates on Category 3, 4, 5 UTP. The Products use AutoNegotiation technology to detect the network speed. Extensive driver supports for including commonly used network operation system Netware, Win9x, Win2000, Windows NT, and TCP/IPare available. The following summarizes the contents of the chapters and appendices. memory. It includes an interface for a boot ROM and can be used in diskless workstations, providing maximum network security and ease of management(Exclude TF-3239DL). They also support full-duplex operation, making possible 200Mbps of bandwidth at no additional cost. The Adapters support both 10Mbps and 100Mbps network speed, 100Base-TX operate on twisted pairs of Category 5 UTP and 10Base-T operate on Category 3, 4, 5 UTP. The Adapters use Auto-Negotiation technology to detect the network speed. Extensive driver supports for including commonly used network operation system Netware, Win9x, Win2000, Windows NT, and TCP/IP are available. Whatever your requirements are ease of installation, superior performance, or responsive support backed up by unlimited technical support, the Product is the superior choice. EC DECLARATION OF CONFORMITY (EUROPE) In compliance with the EMC Directive 89/336/EEC, the adapter meets the requirements of the following standards: Ø EN55022 Ø EN55024 FCC STATEMENT The adapter has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] They also support ACPI, PCI power management for modern operating systems that is capable of Operating System Directed Power Management (OSPM) to achieve the most efficient power management. The Adapters keep network maintenance cost low and eliminate usage barriers. The product is highly integrated and requires no "glue" logic or external Features & Benefits Ø Ø Ø Ø Ø Ø Ø Ø Integrated Ethernet MAC, Physical chip and transceiver in one chip Compliant to PCI Revision 2. 1/2. 2 PCI local bus single-chip Ethernet controller Supports PCI clock 16. 75MHz-40MHz Supports a 32-bit general-purpose timer, referenced by the external PCI clock source, and timer-interrupt Includes a programmable, PCI burst size and early Tx/Rx threshold Supports PCI target fast back-to-back transaction Supports digital and analog loopback capability on both ports 1 2 [. . . ]