User manual TOSHIBA ZL2

[. . . ] ZL2* Digital Series English Contents INSTALLING YOUR TV Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation and important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Inserting batteries and effective range . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] They cannot be viewed when connected to another TV (including the same model of TV), a PC, or other device. · If the recording time to the USB HDD is too short, no data may be saved. · After programming the TV to record digital broadcasting, do not disconnect the power plug before recording starts. Also, leaving the power switch "ON" until recording is scheduled to start, may cause the recording to fail. · Should video or audio recording fail due to malfunction of the TV or poor reception, no compensation shall be paid. · You can reserve up to a total of 64 programmes for recording and viewing. · If there is a power failure or the power plug is disconnected during programmed recording, recording will stop and will not resume when the power returns or the plug is reconnected. · Do not disconnect the power plug when the indicator lamp is lit. · Any changes implemented by the broadcasting station may affect programme scheduling. · Scheduling of multiple consecutive programmes may result in the beginning of each programme not being recorded. · When the "Programme Tracking" for programmed recording is set to "On" and the broadcast time of the scheduled programme overlaps with the start time of timer viewing due to delay, extension, or other causes, timer viewing will be cancelled. · Depending on the situation at the time, not all items can be set or changed. ("X" indicates no setting. ) · Programmed recording cannot take place if the power plug is not connected. · Disconnecting the power plug during recording may result in failure to save the recorded programme. · Changing the USB 2 Port Setup to Media Player will invalidate all previously made programmed recordings (see page 68). a b In the Preferences menu, press B or b to select Network Device Setup and press OK. Press B or b to select Power Control Mode and press C or c to select On or Off. NOTE: · When Wired is selected for the Network type in Network Setup, this feature will be grayed out. · Depending on the device connected to the home network, it may take a while for the TV to turn on. · Depending on the device connected to the home network, this feature may not work. · If the unencrypted Wireless Setup is done, this feature can not be used. Device Name Setup The TV's DMR device name can be changed. The device name can be confirmed from the DMC. a b c d In the Preferences menu, press B or b to select Network Device Setup and press OK. NOTE: The Device Name can be up to 15 characters long. e Highlight Done and press OK to save your setting. 53 CONTROLS AND FEATURES English Setting up the USB HDD To connect a USB HDD (not supplied) USB HDD To USB 2 USB cable (not supplied) While in the list mode, the following key operations are available: OK button. . . . . . . . . . . . . . . . . To format NOTE: · To disconnect a USB HDD from the TV, follow the procedures for "To disconnect a USB HDD" section (page 61). [. . . ] The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. [. . . ]