User manual TOSHIBA TLP 680

[. . . ] 3LCD DATA PROJECTOR QUICK REFERENCE CARD "Camera" function is equipped only with the model which has a document imaging camera model. Connection with External Equipment Connect a stereo system for dynamic sound. [. . . ] Focus ring: Focus the picture. Turn on the connected equipment and put it in playback mode. Projecting Images with the Document Imaging Camera 1 1) Raise up the arm. 4) Open the camera head. 3 Place a document onto or around the projector, and turn the camera head to direction of the document. 2) Stretch the arm. 5) Turn the camera head. document 6) Pull up the light. 4 3) Turn the arm. CAMERA Press CAMERA. The appeared image is a projected one through the camera. 5 7) Turn the light. Move the camera head to adjust the size of the picture, and focus on the picture by turning the focusing ring on the camera head. Up : to reduce. Focusing ring N : Near F : Far Down : To enlarge. After using, return the arm to the original position in the reverse order. 2 ARM LIGHT Press ARM LIGHT. The light turns on. Turning Off the Power After Use 1 Put the connected equipment in the stop mode. 3 ON/STANDBY Press ON/STANDBY again. (Power turns off and then the lamp goes off. ) 2 ON/STANDBY Press ON/STANDBY. An instruction message appears. 4 After confirming the exhaust fan stops, unplug the power cord. For more informations about usage and operations, see the owner's manual. Adjustment and Function Setting 1 MENU Press MENU. The menu is displayed. 2 Press or to select the item. Ke y s t o n e Au t o s e t Ad j u s t ­ + I ma g e Au t o s y n c . Pha s e H­ p o s i t i o n V­po s i t i on Cl ock ­ ­ ­ ­ + + + + Picture Co n t r a s t Br i gh t ness Co l o r Tint Sha r pne s s R- l eve l G- l eve l B- l eve l C ame r a g a i n ­ ­ ­ ­ ­ ­ ­ ­ ­ + + + + + + + + + Au d i o V o l ume Ba s s T r eb l e ­ ­ ­ + + + De f a u l t Language P r o j . mo d e RGB i n p u t Eng l i s h S t anda r d RGB Sa v e Sa v e da t a Al l prese t V i deo s i gna l Au t o S c r n d i s p l a y On 3 Press or to select the item. Auto sync. To restore the adjustments and settings on the menu to the factory set. Auto set . . . To make the correction of keystone distortion 4 ENTER (Item marked with ). [. . . ] Pressing RESET of the remote control will return the adjustment or setting currently selected to default. Note: [. . . ]