User manual TOSHIBA SX2800

[. . . ] 8 Settings Connecting the Handset /AC Adaptor/ Telephone Line Cord . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting a Communication Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Preparing the Answering System Greeting Message . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Programming Summary for the Answering System. . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · The unit will exit the Caller List. SMITH, JACK 1-111-444-7777 1 : 5 AM NOV. 23 3 Press {ERASE}. Erased · A long beep sounds and the information is erased. · After a few seconds, the display will show the previous caller information. · To exit the Caller List, press {EXIT} or wait for 60 seconds. 30 For assistance, please visit http://www. panasonic. com/phonehelp TS620bk01. book Page 31 Wednesday, June 7, 2006 2:57 PM Phonebook Storing Names and Numbers in the Phonebook You can store up to 50 names and phone numbers in the memory. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 6 Press {OK} (Save key). · A long beep sounds. · To continue storing other items, repeat from step 2. Tom Jones 98-765-4321 C 1 2 3 Press {FUNCTION/EDIT}. Press {OK} (Yes key) at "Save phonebook ?". · The number of stored items is also displayed. Enter a name, up to 15 characters using the dialing buttons (p. · If a name is not required, press {OK} (Next key) and go to step 5. · If the display shows "Phonebook full" in step 2, press {EXIT} to exit the list. · You can exit the programming mode any time by pressing {EXIT}. · If a pause is required for dialing, press {PAUSE} where needed. 38, 40). To store an emergency number (#): Emergency numbers are numbers stored in the Phonebook that can be dialed even when the Call Restriction (p. To store a number as an emergency number, add # at the beginning of the name in step 3. 4 5 Press {OK} (Next key). 32). · To clear an incorrect character, move the cursor to the character by using {:} or {9}, then press {ERASE}. Press {OK} (Yes key). · A long beep sounds and the item is erased. · To exit the Phonebook list, press {EXIT}. 5 6 7 Press {OK} (Next key). Insert the required numbers. · If you entered a wrong number, press {ERASE} and enter the correct number. · Item with # at beginning cannot be deleted when the Call Restriction (p. · You can exit the programming mode any time by pressing {EXIT}. Press {OK} (Save key). · A long beep sounds. · To exit the Phonebook, press {EXIT} or wait for 60 seconds. For assistance, please visit http://www. panasonic. com/phonehelp 35 TS620bk01. book Page 36 Wednesday, June 7, 2006 2:57 PM Direct Dial (M1, M2, M3) Storing Names and Numbers in the Direct Dial memory You can store up to 3 names and phone numbers in the memory. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 6 Press one of the Direct Dial button ({M1}, {M2} or {M3}) (Save key). 42), you cannot store a phone number in the Direct Dial memory ({M1}, {M2} or {M3}). 1 2 3 Press {FUNCTION/EDIT}. Scroll to "Save M1, M2, M3 ?" by pressing {4} or {3} and press {OK} (Yes key). Enter a name, up to 15 characters with the dialing buttons {0} to {9}, {£} and {#} (p. · If a name is not required, go to step 4. If the Direct Dial button selected manually is occupied, the display will be shown as below. []=No [OK]=Yes To select the other empty Direct Dial memory, press {3} (No key) and press an empty Direct Dial button ({M1}, {M2} or {M3}). · A long beep sounds. [. . . ] (collectively referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. Parts Labor One (1) Year One (1) Year During the "Labor" Limited Warranty period there will be no charge for labor. During the "Parts" Limited Warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). [. . . ]