User manual TOSHIBA ST-7000-C

[. . . ] TOSHIBA POS Terminal ST-7000C SERIES Owner's Manual CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen. Dans un environnement domestique, il peut causer des interférences radio. [. . . ] Continued use of the machine in that condition may cause fire or electric shock. Fire or electric shock could occur on improperly grounded equipment. Disconnect the plug. When unplugging the power cords, be sure to hold and pull on the plug portion. Pulling on the cord portion may cut or expose the internal wires and cause fire or electric shock. Connect a grounding wire. No disassembling. Do not remove covers, repair or modify the machine by yourself. You may be injured by high voltage, very hot parts or sharp edges inside the machine. Unauthorized modification is prohibited. indicates that there is the risk of Injury or damage CAUTION Thismachines are improperly handled personal to this indication. to objects if the contrary Precautions The following precautions will help to ensure that this machine will continue to function correctly. Try to avoid locations that have the following adverse conditions: * Temperatures out of the specification * Direct sunlight * High humidity * Shared power source * Excessive vibration * Dust/Gas Do not subject the machine to sudden shocks. by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly. At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine. Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference. DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or gas. When moving the machine, take hold of the drawer and lift the machine. Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury. Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and may cause fire. After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistancii once a year to have the inside of the machine cleaned. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. Please refer to your local Authorised Service representative with regard to any queries you may have in this manual. 1. This POS Terminal contains all the high performance register function necessary for a POS Terminal and enables the user oriented system configuration. By adopting a high-speed CPU, Memory with large capacity, this POS Terminal flexibly accepts the modification corresponding to the future system environment as the user expects. This manual describes the functions and handling of this POS terminal and should be read carefully to help gain maximum performance and life from your POS terminal. For most queries please refer to this manual and keep it safe for future reference. 1. 1 Accessories# Confirm that all the following accessories are contained in the carton. If any accessories are missing or damaged, contact your TOSHIBA TEC service representative. Cable Cover (1 pc. ) Front Panel Key (2 pcs. ) Cable Clamp (2 pcs. ) (Used to secure the USB Cable, etc. [. . . ] 3) The base of the display unit does not protrude beyond the steel plate at the top of the main unit. 2. 3. 4. 2 Attaching the Cable Cover 1. Insert the guides on both sides of the cable cover into the slits provided on the POS terminal, then slide down the cable cover to the bottom. NOTE: Be sure to attach the cable cover for protecting the cables. Guide Slit Cable Cover 2. When detaching the cable cover, hold both sides by hands, then pull it up. 4- 1 5. HOW TO LOCK/UNLOCK THE FRONT PANEL << How to unlock the front panel >> Front Panel Lock Front Panel # 1. 3. Insert the front panel key into the front panel lock, and turn it counterclockwise to unlock the front panel. [. . . ]