User manual TOSHIBA SD-3755

[. . . ] DVD PLAYER OWNER'S MANUAL MODEL : SD-3755 3D Surround Sound Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. ©2001 Toshiba Corporation PAGE 2 INTRODUCTION Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: ATTENTION: CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] Note: The disc tray which was in the play position can not be exchanged. 3 OPEN/ CLOSE Exchange the discs and press EX-CHANGE or OPEN/CLOSE to close the loading drawer. Skipping Discs Press DISC SKIP during playback or in the stop mode. G Each time the button is pressed, the next disc tray is selected. TITLE DVD CHP/TRK 12345 12345 Notes When the DISC SKIP is pressed during playback or in the stop mode, the disc tray advances to the next disc. If there is no disc on the selected disc tray, the disc tray of the next number will be selected. PLAY Exchanging the Disc and Starting Playback 1 DISC SKIP Press OPEN/CLOSE during playback or in the stop mode. Play is stopped (if pressed during playback), the loading drawer opens and the disc tray which was in the play position comes to the center position. 2 Exchange the disc in the center position. Center position 3 Press OPEN/CLOSE or PLAY again. The loading drawer closes, the disc tray returns to the play position and playback begins from the new disc. PAGE 22 BASIC OPERATION Special Playback Still Picture (Pause) Press PAUSE during playback. G DVD/Video CD The player will be placed in the still picture mode. G CD Playback will be paused. Frame Advance (DVD and Video CD only) Press PAUSE during still playback. (Each time you press PAUSE, the picture advances one frame) PAUSE SKIP SKIP To resume normal playback, press PLAY. Skipping Chapters and Tracks Forward or Back Skipping forward Press SKIP during playback. A chapter (DVD) or a track (CD/Video CD) is skipped each time this button is pressed. STOP PLAY Skipping back Press SKIP during playback. G When this button is pressed once midway through a chapter/track, the player returns to the start of that chapter/track. When it is pressed repeatedly, a chapter/track is skipped each time the button is pressed. For your reference: G When SKIP is pressed during menu play of video CDs equipped with PBC (Version 2. 0), a menu screen may appear. How To Set The Video Mode Mini glossary G With certain DVD disc, the playback picture is flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with DVD disc. In that case, the picture quality can be improved with changing video mode. G To change the video mode, press and hold OSD button on the remote control about 3 seconds during playback of DVD disc. G Procedure of video mode is changed; Video1 Video2 Film Adapt Auto. G If you turn off the the power, the video mode will be back to initial state (Auto). Detailed Description of each Video Mode Auto : The image material types of the DVD video (film material or video material) are distinguished by this player based on the disc information. Video1 : Suitable for playing the disc of video material which has comparatively few movements. Video2 : Suitable for playing the disc of video material which has comparatively many movements. Film : Suitable for playing the disc of film material or of video material recorded by the progressive scan method. Adapt : Decides the material type (film or video) by playing the disc, and switches the modes. Suitable for playing the disc mixed of film and video material. BASIC OPERATION PAGE 23 Special Playback (Cont'd) You can play back discs at various speeds. To Scan at Fast Forward or Fast Reverse Playback. Press and hold SKIP or button for about two seconds during playback. [TV screen] FF X2 GG X2 SLOW (F V / V G) SKIP SKIP PLAY G The image advances (or reverses) is relatively slow at first. (Each time the button is pressed, the speed increases up to 4 steps (DVD) or 3 steps (CD/Video CD). ) G The speed will be maintained even after the button is released. To return to normal playback, press PLAY. Note The DVD player does not play back sound during high speed reverse and forward playback of DVD video discs. However, the DVD player plays back sound during fast forward or fast reverse playback of audio CDs. Subtitles do not appear on the screen during scan playback. Playing in Slow-Motion (DVD and Video CD only) F V or V G during playback. The playback speed is reduced to 1/16 of the normal speed. Press SLOW [TV screen] FV 1/16 V G 1/16 G The speed that the image advances (or reverses) is slow at first. (Each time the button is pressed, the speed increase up to 4 steps. ) G The speed will be maintained even after the button is released. To return to normal playback, press PLAY. Notes The sound is muted during slow-motion playback. The SLOW buttons do not function with Audio CDs. PAGE 24 OPERATION USING GUI MENU General Information about GUI Menu This unit features an icon based GUI menu showing disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc. ). Other icons allow settings to be changed. Common procedures 1 Press GUI DISPLAY during playback. G Title function can be accessed from the stop mode. 2 Press D/E to select the desired item. G The current selected item is highlighted by a yellow frame around its menu icon. 1 2, 3 3 Press F/G to select the desired setting. G When numbers are displayed (e. g. [. . . ] Your Responsibility The above warranties are subject to the following conditions: (1) You must retain your bill of sale or provide other proof of purchase. (2) You must notify a TACP/THI/TCL /Authorized Service Station within thirty (30) days after you discover a defective product or part. (3) All warranty servicing of this product must be made by a TACP/THI/TCL Authorized Service Station. warranties are effective only if the product is purchased and operated in the Continental U. S. A. [. . . ]