User manual TOSHIBA SD-V596SU

[. . . ] DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER SD-V592SU SD-V596SU OWNER'S MANUAL Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. ©2004 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] If you forget your Security Code If you forget your security code you can clear it using the following steps: 1. Input the 6-digit number "210499" and the security code is cleared. Enter a new code as described above. Country Code DVD Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter (see p. Press ENTER to confirm your country code selection. 22 Operation with tape Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV's source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Set the Output Source to VCR as shown in Selecting the Viewing Source on page 6. Special Effect Playbacks Special effects playback notes 1 Insert a prerecorded video cassette. The indicator will light and the DVD+VCR will power-up automatically. If a tape without a safety tab is inserted, the unit will start playback automatically. Search This function lets you quickly and visually search for a desired tape section in either direction: forward and reverse. 2 To return to playback, press PLAY. PLAY 2 Pressappearsonce. the TV screen . STOP TV screen. It is not necessary to select the tape speed for playback. In playback, the TV/VCR selector switches to VCR mode automatically. Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP during playback. Still picture will appear on the TV screen. If a still picture vibrates vertically, stabilize it by pressing CH/TRK (+/-) on the remote control. If the DVD+VCR is left in the STILL mode for more than 5 minutes, the DVD+VCR will automatically enter the STOP mode to protect the tape and video heads. 2 Press PAUSE/STEP repeatedly to advance the If the tape reaches the end before STOP is pressed, the DVD+VCR will automatically stop, rewind, eject, and it will turn itself off. Tracking Control Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. The AUTO TRACKING function works in the following cases: When the ATR(AUTO TRK) button is pressed. Streaks or snow appear because of scratches on the tape. video picture one frame at a time while viewing a still picture. 3 To return to playback, press PLAY. Slow Motion 1 Press SLOW during playback or still mode. The tape will be played back at a speed 1/19 times slower than the normal speed. If slow motion mode continues for more than 3 minutes, the DVD+VCR will automatically change to playback mode. Manual Tracking If noise appears on the screen during playback, press CH/TRK (+/-) until the noise on the screen is reduced. In case of vertical jitter, adjust these controls very carefully. Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds. 2 To return to playback, press PLAY. Instant Skip This is useful for skipping commercials or short program segments. The tape will fast forward picture search through 30 seconds of recording. The skipping time can be extended by pressing INSTANT SKIP. Subsequent presses result in advancing the fast forward picture search time by 30-second increments (maximum 3 minutes). Rewinding/Fast-forwarding Press REW (m) or FF (M) in the Stop mode. 2 When the search is completed, the DVD+VCR will go into playback mode automatically. 23 OPERATION Horizontal lines (noise bars) will appear on the TV screen. [. . . ] THE CONSUMER IS RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE DVD/VCR COMBINATION TO THE EXCHANGE CENTER. DURING THE PERIOD FROM 91 DAYS AND BEYOND, FROM THE PURCHASE DATE, TACP WILL EXCHANGE A DEFECTIVE DVD/VCR COMBINATION WITH A NEW OR REFURBISHED PLAYER FOR A NOMINAL FEE. YOU MUST CONTACT TOSHIBA'S CONSUMER SOLUTIONS CENTER FOR INSTRUCTIONS ON HOW TO PROCESS YOUR EXCHANGE REQUEST. THE CONSUMER IS RESPONSIBLE FOR ALL INBOUND TRANSPORTATION AND INSURANCE CHARGES FOR THE DVD/VCR COMBINATION TO THE EXCHANGE CENTER. [. . . ]