User manual TOSHIBA SD-V393

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA SD-V393. We hope that this TOSHIBA SD-V393 user guide will be useful to you.


TOSHIBA SD-V393 : Download the complete user guide (4046 Ko)

Manual abstract: user guide TOSHIBA SD-V393

Detailed instructions for use are in the User's Guide.

[. . . ] Introduction 2 Connections DIGITAL VIDEO 14 DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER Basic setup (VCR) 22 SD-V393SU OWNER'S MANUAL Playback (VCR) 29 Recording (VCR) 34 Other functions (VCR) 39 Basic playback (DVD) 42 Advanced playback (DVD) 45 Function setup (DVD) 55 Others 61 2005 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 2H20101A (E) COV 1 2/10/05, 7:31 PM Introduction SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] You can correct or cancel a programmed setting in program confirm mode. 38 2H20101A (E)p38-41 38 2/10/05, 7:33 PM Other functions (VCR) Stereo recording and playback / Second Audio Program (SAP) VCR MENU ENTER SET +/ AUDIO SELECT Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When a MTS STEREO broadcast is received, "STEREO" will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo. The Hi-Fi stereo recording procedure is the same as for normal recordings. Second Audio Program (SAP) Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. STEREO 1 Press VCR MENU. Then press SET + or to select "SAP". MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +//ENTER/MENU Note: When using a Cable TV system, stereo TV programs may be transmitted over a mono cable channel. In this case "STEREO" will not appear and the sound will be in mono. Other functions (VCR) Output selection When viewing an MTS stereo TV program, or playing a prerecorded VHS Hi-Fi stereo videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi stereo position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left HiFi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SELECTION STEREO L ch R ch SOUND HEARD ON BOTH SPEAKERS STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO 2 Press ENTER to select "ON". Then press VCR MENU until the menu screen is cleared. MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +//ENTER/MENU Listening to SAP When the VCR is turned on or a channel selection is made, make certain the letters "SAP" appears on the screen for about 4 seconds. This means that the "Second Audio Program" broadcasting is available. STEREO SAP 5)2 OR Notes: When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cable not connected), the sound will be monaural. 39 2H20101A (E)p38-41 39 2/10/05, 7:33 PM Other functions (VCR) Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. VCR DVD INPUT SELECT STOP SP/SLP REC/OTR Duplicating a video tape Preparation: Turn ON the TV and select the corresponding video input. (The VCR indicator will light. ) Load a cassette tape with the erase prevention tab intact. Connection with second VCR Playback VCR To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT 1 2 Press SP/SLP to select the desired tape speed SP or SLP. It is recommended that you set the tape speed to the SP mode on the recording VCR for best results. AUDIO/VIDEO cable (supplied) Recording VCR Press INPUT SELECT once or twice to select AUDIO/VIDEO input position. "L1" or "L2" will appear in the display. To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN L1: on the rear panel L2: on the front panel Connection with Camcorder Playback Camcorder 3 4 5 40 Press PLAY on the playback VCR or Camcorder. To AV Jack Press REC/OTR on the recording VCR. The duplicating process begins. Recording VCR To AUDIO (R) IN To AUDIO (L) IN To VIDEO IN AUDIO/VIDEO cable (not supplied) Press STOP after duplicating a video tape. For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. 2H20101A (E)p38-41 40 2/10/05, 7:33 PM Recording a DVD/CD disc You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR. VCR DVD STOP PLAY SP/SLP REC/OTR Duplicating a DVD or CD disc Preparation: Turn ON the TV and select the corresponding video input. (The VCR indicator will light. ) Load a cassette tape with the erase prevention tab intact. Load a DVD/CD disc. Notes: You may not be able to record the beginning of the disc. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA SD-V393




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA SD-V393 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.