User manual TOSHIBA SATELLITE U500

[. . . ] The following procedures allow you to navigate the setup utility menus: Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. ], [ ] 1. To select a field within a menu or a submenu, use the cursor keys: [ ], [ ]. To select the different values for each field, press the [Spacebar] or [+] to change to the next lower selection and [F5] or [-] to go to the next higher selection. [. . . ] Opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays. Opens the Internal Device Configuration submenu, which allows enabling or disabling the IDE, Bluetooth, and LAN Controllers. Opens the CPU Features submenu to allow you to enable or disable AMD VirtualizationTM. F1: Help vv v02. 59 (C)Copyright 1985-2006, American Megatrends, Inc. Figure 4. Advanced Menu Esc: Exit Internal Device Configurations CPU Features 9 LifeBook A Series BIOS Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field USB Features Description Opens the USB Features submenu to allow you to enable or disable legacy USB devices and SCSI SubClass support. Opens the Miscellaneous Configurations submenu to allow you to enable or disable the power button, Wake Up On LAN, control volume settings, and adjust UMA video memory size. Opens the event logging submenu. Miscellaneous Configurations Event Logging 10 Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Main Advanced BIOS Setup Utility Security Boot Info Exit [On] or [Off] Numlock is On or Off. Keyboard/Mouse Features Numlock: [Off] [On/Padlock Off] Numlock is On, but use with [Fn] for 10-key input. * Windows XP preserves Numlock state when the user logs off. F1: Help vv v02. 59 (C)Copyright 1985-2006, American Megatrends, Inc. Figure 5. Keyboard/Mouse Features Submenu Esc: Exit Table 5: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Numlock: Options Default [Off] Description Sets the NumLock function state when the computer completes booting. When [On/Padlock Off] is selected, Numlock is on, but [Fn] key must be pressed used for 10-key input. Windows XP preserves Numlock state when the user logs off. On Off On/Padlock Off 11 LifeBook A Series BIOS Video Features Submenu of the Advanced Menu The Video Features submenu is for setting the display parameters. BIOS Setup Utility Security Boot Info Main Advanced Exit Video Features Select display terminal. * This setting is not effective after operating system starts up. Display: Compensation: [Auto] [Enabled] F1: Help vv v02. 59 (C)Copyright 1985-2006, American Megatrends, Inc. Figure 6. Boot sector protection must be set to [Normal] to install or upgrade an operating system. Main Advanced BIOS Setup Utility Security Boot Info Exit Supervisor Password Is: Clear User Password Is : Clear Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media: Flash Write: Hard Disk Security Owner Information [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] [Enabled] Press <Enter> key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup. F1: Help vv v02. 59 (C)Copyright 1985-2006, American Megatrends, Inc. Esc: Exit Figure 12. Security Menu 19 LifeBook A Series BIOS Table 12: Fields, Options and Defaults for the Security Menu Menu Field Supervisor Password is: User Password is: Options ­-- Default Clear Description A display-only field. Set is displayed when the system supervisor password is set and Clear when it is not. Set is displayed when the general user password is set, and Clear when it is not. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. A User Password may be up to seven characters long and must include only letters or numbers (no symbols). To cancel a password press [Enter] key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. [. . . ] A bootable CD-ROM has either a floppy disk format or a hard drive format. When a bootable CD-ROM is used, drive allocations change automatically without changing the BIOS setup. The CD-ROM will only take drive C: (hard drive format) if internal hard drive is not present or is disabled. A bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive. The boot sequence ignores the new drive designations, but your application software will use the new designations. Main Advanced BIOS Setup Utility Security Boot Info Exit 1st 2nd 3rd 4th Boot Boot Boot Boot Device Device Device Device [! [. . . ]