User manual TOSHIBA SATELLITE PRO C660

[. . . ] MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu Computer Systems Corporation is under license. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel, Centrino, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. [. . . ] If using static WEP keys, enter static WEP key and choose key index. 10. If you wish to enable Cisco Compatible Extensions, click Cisco Options and check the "Enable Cisco Compatible Extensions" box. To enable LEAP support, check the 802. 1x option and choose LEAP from the pull down list. Select Open, Shared, WPA-Enterprise, WPA2Enterprise, WPA-Personal, or WPA2-Personal in the Network Authentication options. If WEP is selected, select either 64 or 128-bit for the Encryption Level. The key index must be identical to the WEP key index used by the Access Point. If your network does not employ a 802. 1x/EAP security mechanism, please skip to step 24. Click the Enable 802. 1x checkbox to enable the 802. 1x security option. Please contact your network administrator if configuration of this setting is required. Please contact your network administrator if configuration of this setting is required. After selecting authentication type, enter the name, domain, and password of the user you have created on the authentication server. 6. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection: Assign the name of the work group to be accessed. 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server 53 LifeBook N Series Notebook - Section Five 6. Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. Setting the file-sharing function The procedure for setting the file-sharing function follows, with the "work" folder in drive C: as an example. Right-click the "work" folder (or whichever folder you want to share), and then click [Sharing and Security. . . ] in the menu displayed. The [Folder Name Properties] window will be displayed. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the filesharing function easily without using Network Setup Wizard are given below. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing function is to be used. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. Setting the Microsoft network-sharing service 1. [. . . ] When used with Microsoft® Windows® XP Media Center Edition, the TV tuner provides several features that make watching and recording television programs easy and enjoyable. Using the TV tuner, you can: Item 1 Name Audio Input Jacks Description Used to connect to the audio output of external devices such as video decks or set top boxes. The image input from a device connected to this jack is displayed when "Composite" input is selected. The image input from a device connected to this jack is displayed when "S-Video" input is selected. [. . . ]