User manual TOSHIBA SATELLITE PRO C650D

[. . . ] MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu Computer Systems Corporation is under license. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. [. . . ] Select Open, Shared, WPA-Enterprise, WPA2Enterprise, WPA-Personal, or WPA2-Personal in the Network Authentication options. If WEP is selected, select either 64 or 128-bit for the Encryption Level. The key index must be identical to the WEP key index used by the Access Point. If your network does not employ a 802. 1x/EAP security mechanism, please skip to step 24. Click the Enable 802. 1x checkbox to enable the 802. 1x security option. Please contact your network administrator if configuration of this setting is required. Please contact your network administrator if configuration of this setting is required. After selecting authentication type, enter the name, domain, and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. 3. Configure network settings TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING INTEL PROSET FOR WIRELESS UTILITY This section explains the procedure to properly configure the WLAN device using the Intel PROSet for Wireless utility. Please consult with your network administrator for these parameters: Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet for Wireless utility. For access point (infrastructure) connection: Assign the name of the work group to be accessed. 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server 53 LifeBook N Series Notebook - Section Five 6. Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. Setting the file-sharing function The procedure for setting the file-sharing function follows, with the "work" folder in drive C: as an example. Right-click the "work" folder (or whichever folder you want to share), and then click [Sharing and Security. . . ] in the menu displayed. The [Folder Name Properties] window will be displayed. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the filesharing function easily without using Network Setup Wizard are given below. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing function is to be used. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. Setting the Microsoft network-sharing service 1. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. [. . . ] Standard that provides resolutions of 640x480 or 1024x764, supporting 64k colors. 95 LifeBook N Series Notebook ­ Section Nine 96 Appendix Connecting a TV Tuner* * Optional device 97 LifeBook N Series Notebook ­ Appendix A 98 TV Tuner Getting Started Guide TV Tuner Getting Started Guide This guide introduces you to the optional built-in TV tuner, including its controls and ports. When used with Microsoft® Windows® XP Media Center Edition, the TV tuner provides several features that make watching and recording television programs easy and enjoyable. Using the TV tuner, you can: Item 1 Name Audio Input Jacks Description Used to connect to the audio output of external devices such as video decks or set top boxes. The image input from a device connected to this jack is displayed when "Composite" input is selected. [. . . ]